- Father Ted
- Centenial time waster
- Posts: 2780
- Joined: 03 Apr 2009
- Location: Granadaland
Re: Austin Mini...
Sell the bus, and the ambulance and buy a small fun car to fuck about with and hoon around in then.
Me, if I had the money I would love to "cooperise" an AD016, preferably a two door in tartan red. Not really bothered about what body shell it starts off with. My first car was a Diamond White 4 door Austin Mk2. I learned to arc weld on the rear subframe. I too used to dick about with cars.
Me, if I had the money I would love to "cooperise" an AD016, preferably a two door in tartan red. Not really bothered about what body shell it starts off with. My first car was a Diamond White 4 door Austin Mk2. I learned to arc weld on the rear subframe. I too used to dick about with cars.
-
- GET OUT MORE
- Posts: 8744
- Joined: 01 Nov 2007
- Location: Wigan Lancs
- Contact:
Re: Austin Mini...
Well that was just the point wasn't it. You could fuck about with them. They were simple and you coul get something that would have been dead to most people and get it running again. It was the sense of achievement that spurred you on and it was fun.and cost very little
It was the same with old bikes.
Nowadays everything is electronic and computer controlled so even if you find something cheap enough to play with you need a degree in computer science which rather takes the edge of the fun bit .....rather!!!
It was the same with old bikes.
Nowadays everything is electronic and computer controlled so even if you find something cheap enough to play with you need a degree in computer science which rather takes the edge of the fun bit .....rather!!!
72... AND STILL ROCKIN..........around the world...... NOT in a chair yet
Now XBX And into HDI.....as well as other ...err.... things.
Now XBX And into HDI.....as well as other ...err.... things.
-
- GET OUT MORE
- Posts: 4639
- Joined: 12 Jun 2007
- Location: in the cowshed
Re: Austin Mini...
moggy minor, 1:8 twin carb marina engine and front suspension, set of MG rostyles, jobs a goodun
Light travels quicker than sound.That's why some people appear bright until you hear them speak.
- Father Ted
- Centenial time waster
- Posts: 2780
- Joined: 03 Apr 2009
- Location: Granadaland
Re: Austin Mini...
Here's a thought - I wonder if it would be possible to replace the alcohol filled hydro suspension on an AD016 with standard springs & shocks.
I gather parts are becoming harder to find and it might make for a more fun handling motor if you could stiffen it up a bit
I suppose the alternative would be to look for an A40 instead...
Oh, now look what you have made me do... Im going to spend the rest of the shift on Car & Classic.
I gather parts are becoming harder to find and it might make for a more fun handling motor if you could stiffen it up a bit
I suppose the alternative would be to look for an A40 instead...
Oh, now look what you have made me do... Im going to spend the rest of the shift on Car & Classic.
-
- GET OUT MORE
- Posts: 4577
- Joined: 21 Nov 2006
- Location: By a flaky computer
Re: Austin Mini...
Like this?Father Ted wrote:I wonder if it would be possible to replace the alcohol filled hydro suspension on an AD016 with standard springs & shocks.
http://www.minimania.com/web/Item/mmkt0 ... Detail.cfm
1991 BX19GTi Auto
- Father Ted
- Centenial time waster
- Posts: 2780
- Joined: 03 Apr 2009
- Location: Granadaland
Re: Austin Mini...
Now to my mind that would make the AD016 a much more usable classic. The hydralastic set up is sublime to ride in, but not great to maintain these days.
Oh dear, thank christ Im on clockwork dial up at the caravan with an old coat hanger lashed to the gas cylinder for an aerial
Oh dear, thank christ Im on clockwork dial up at the caravan with an old coat hanger lashed to the gas cylinder for an aerial
-
- Site Admin
- Posts: 7512
- Joined: 10 Oct 2006
- Location: BXProjectHQ
- catsinthewelder
- Getting Started
- Posts: 91
- Joined: 06 Jul 2010
- Location: Ludlow
Re: Austin Mini...
Springs on an 1100 has been done a few times
http://www.forums.ado16.info/cgi-bin/fo ... 6302/s-15/" onclick="window.open(this.href);return false;
We're sticking with bouncy hydrolastic on ours though
http://www.forums.ado16.info/cgi-bin/fo ... 6302/s-15/" onclick="window.open(this.href);return false;
We're sticking with bouncy hydrolastic on ours though
- smiffy
- Centenial time waster
- Posts: 2176
- Joined: 02 Aug 2007
- Location: Ormskirk or Bristol
- Contact:
Re: Austin Mini...
Has anyone ever taken the crappy hydra-gas units from a Leyland car, (all-agro, princess, ambastardor) put proper Citroen suspension in?
They say an apple a day keeps the doctor away...
but now that most of them are muslim, I find bacon and sausages work better!
but now that most of them are muslim, I find bacon and sausages work better!
-
- GET OUT MORE
- Posts: 4639
- Joined: 12 Jun 2007
- Location: in the cowshed
Re: Austin Mini...
my mum had a lovely blue mini shitty ,they went away for a week in there mk1 cavalier so I put cosmic alloys, a wood and pickett dash and black nudgebars plus a black vinyl roof on it, it looked the fucking mutts dangly bits.
they were so impressed they let me get alloys for the cav and I put a vinyl roof and sunroof on that as well
they were so impressed they let me get alloys for the cav and I put a vinyl roof and sunroof on that as well
Light travels quicker than sound.That's why some people appear bright until you hear them speak.
- docchevron132
- Bus Warrior
- Posts: 11929
- Joined: 10 Oct 2006
- Location: Sat with a hammer under 8666KGs of rust!
- Contact:
Re: Austin Mini...
nooooooooo! Of all the shite I own, and let face it, there's a LOT of it, I will never part with the bus, or the FG. They will remain mine until I snuff it.Father Ted wrote:Sell the bus, and the ambulance and buy a small fun car to fuck about with and hoon around in then.
Even if I get a mini with the hydrolastic setup, it wont be keeping it!
As it goes, a clubman could be on the cards after all...
1989 BX 17TD P2 Hybrid
1990 BX 16V It's got big hairy bollocks
1971 BL 350FG ambulance
1993 Dennis Lance 132 It's got mahooosive hairy bollocks!
Euthenasia, because enough's enough already.
1990 BX 16V It's got big hairy bollocks
1971 BL 350FG ambulance
1993 Dennis Lance 132 It's got mahooosive hairy bollocks!
Euthenasia, because enough's enough already.
-
- GET OUT MORE
- Posts: 8744
- Joined: 01 Nov 2007
- Location: Wigan Lancs
- Contact:
Re: Austin Mini...
I aspired to a clubman once. I bought a van in 1967 £395 (new) It was all I could afford with a mortgage and two pan lids.
Over the next 3 years I fitted a rear seat conversion, side windows and a Clubman grille and surround.
Next best thing I suppose.
Over the next 3 years I fitted a rear seat conversion, side windows and a Clubman grille and surround.
Next best thing I suppose.
72... AND STILL ROCKIN..........around the world...... NOT in a chair yet
Now XBX And into HDI.....as well as other ...err.... things.
Now XBX And into HDI.....as well as other ...err.... things.
- docchevron132
- Bus Warrior
- Posts: 11929
- Joined: 10 Oct 2006
- Location: Sat with a hammer under 8666KGs of rust!
- Contact:
Re: Austin Mini...
Vans are like rocking horse shit now though....
1989 BX 17TD P2 Hybrid
1990 BX 16V It's got big hairy bollocks
1971 BL 350FG ambulance
1993 Dennis Lance 132 It's got mahooosive hairy bollocks!
Euthenasia, because enough's enough already.
1990 BX 16V It's got big hairy bollocks
1971 BL 350FG ambulance
1993 Dennis Lance 132 It's got mahooosive hairy bollocks!
Euthenasia, because enough's enough already.
-
- GET OUT MORE
- Posts: 8744
- Joined: 01 Nov 2007
- Location: Wigan Lancs
- Contact:
Re: Austin Mini...
They had even less rust protection than the cars, the battery was stuck at the side behind the driver and the cable unbelievably was taken under the vehicle, to the starter. With the current flow and creepage of the white stuff from the battery, it managed to produce a hole about 3" dia in the floor within 18 months.
After welding patches I re routed the cable inside, taking it through the bulkhead with a proper rubber grommet, like it should have been in the first place.
Same thing used to happen to the boot floor in the cars.
Oh, and the grill was a full panel pressing so you couldn't get at the dizzy properly. That was my main reason for fitting the clubman grille TBH. It allowed me to cut the original away. you couldn't even fit the rubber glove to the dizzy cap and cables before.
After welding patches I re routed the cable inside, taking it through the bulkhead with a proper rubber grommet, like it should have been in the first place.
Same thing used to happen to the boot floor in the cars.
Oh, and the grill was a full panel pressing so you couldn't get at the dizzy properly. That was my main reason for fitting the clubman grille TBH. It allowed me to cut the original away. you couldn't even fit the rubber glove to the dizzy cap and cables before.
72... AND STILL ROCKIN..........around the world...... NOT in a chair yet
Now XBX And into HDI.....as well as other ...err.... things.
Now XBX And into HDI.....as well as other ...err.... things.
- Father Ted
- Centenial time waster
- Posts: 2780
- Joined: 03 Apr 2009
- Location: Granadaland
Re: Austin Mini...
I had the Ducellier set up on my red one and it used to gobble points like you would not believe.
I got a dab hand at changing them at the side of the road and had quick release pins fitted to the grille to help with this.
Still a barrel of laughs to drive.
After a weekend of dipping in and out of Autotrader and C&C I has decided on not a mini or AD016 but a SWB Series 3 Landy, or more preferably if I can find a not totally shagged out one for less than £3K a defender SWB SW.
I got a dab hand at changing them at the side of the road and had quick release pins fitted to the grille to help with this.
Still a barrel of laughs to drive.
After a weekend of dipping in and out of Autotrader and C&C I has decided on not a mini or AD016 but a SWB Series 3 Landy, or more preferably if I can find a not totally shagged out one for less than £3K a defender SWB SW.
- docchevron132
- Bus Warrior
- Posts: 11929
- Joined: 10 Oct 2006
- Location: Sat with a hammer under 8666KGs of rust!
- Contact:
Re: Austin Mini...
solid state ignition FTW!
It'll need it to, I'm fitting a front mount rad!
Always prefered the series Landy's to the defender TBH..
It'll need it to, I'm fitting a front mount rad!
Always prefered the series Landy's to the defender TBH..
1989 BX 17TD P2 Hybrid
1990 BX 16V It's got big hairy bollocks
1971 BL 350FG ambulance
1993 Dennis Lance 132 It's got mahooosive hairy bollocks!
Euthenasia, because enough's enough already.
1990 BX 16V It's got big hairy bollocks
1971 BL 350FG ambulance
1993 Dennis Lance 132 It's got mahooosive hairy bollocks!
Euthenasia, because enough's enough already.
-
- GET OUT MORE
- Posts: 8744
- Joined: 01 Nov 2007
- Location: Wigan Lancs
- Contact:
Re: Austin Mini...
I always dream of "finding" a moggy minor woody and doing that up from scratch, but adding all the bitz that have been produced for it. Like strengthened btm steering joints etc.
I know one guy fitted a 1725 O series!!!!
I know one guy fitted a 1725 O series!!!!
72... AND STILL ROCKIN..........around the world...... NOT in a chair yet
Now XBX And into HDI.....as well as other ...err.... things.
Now XBX And into HDI.....as well as other ...err.... things.
- docchevron132
- Bus Warrior
- Posts: 11929
- Joined: 10 Oct 2006
- Location: Sat with a hammer under 8666KGs of rust!
- Contact:
Re: Austin Mini...
I know a guy with a 3.9 V8 Moggy, it's utterly insane!
1989 BX 17TD P2 Hybrid
1990 BX 16V It's got big hairy bollocks
1971 BL 350FG ambulance
1993 Dennis Lance 132 It's got mahooosive hairy bollocks!
Euthenasia, because enough's enough already.
1990 BX 16V It's got big hairy bollocks
1971 BL 350FG ambulance
1993 Dennis Lance 132 It's got mahooosive hairy bollocks!
Euthenasia, because enough's enough already.
-
- GET OUT MORE
- Posts: 8744
- Joined: 01 Nov 2007
- Location: Wigan Lancs
- Contact:
Re: Austin Mini...
Well lets face it, there is loads of room in there to fit just about anything. I've seen a few V8 versions but the inner wings were butchered and a chopped Jag front axle stuck in One I saw had a BM - M3 back end
72... AND STILL ROCKIN..........around the world...... NOT in a chair yet
Now XBX And into HDI.....as well as other ...err.... things.
Now XBX And into HDI.....as well as other ...err.... things.
- docchevron132
- Bus Warrior
- Posts: 11929
- Joined: 10 Oct 2006
- Location: Sat with a hammer under 8666KGs of rust!
- Contact:
Re: Austin Mini...
not sure what the front end set up is, but the back axle is the mighty Jag IRS.
1989 BX 17TD P2 Hybrid
1990 BX 16V It's got big hairy bollocks
1971 BL 350FG ambulance
1993 Dennis Lance 132 It's got mahooosive hairy bollocks!
Euthenasia, because enough's enough already.
1990 BX 16V It's got big hairy bollocks
1971 BL 350FG ambulance
1993 Dennis Lance 132 It's got mahooosive hairy bollocks!
Euthenasia, because enough's enough already.