-
- Site Admin
- Posts: 7512
- Joined: 10 Oct 2006
- Location: BXProjectHQ
How to wire a BX window motor for Race Purposes (for JayW)
Bit of a random one this, a friend of mine who i building a BX racer asked about how to wire the window winder with the most simple scheme.
I hope this is simple enough, i can explain in detail if you want, same thing will work for both sides. You can earth locally, so you only need to take two wires to the passenger door. It is possible to add a second switch in line so that you have a passenger and driver switch for the passenger window.
Add a fuse, probably 30amp for both windows (run through the same fuse). Relay is only there to stop windows being wound down with the ignition off. Personally i would have a master breaking switch to kill everything but the alarm, so then it wouldn't matter.
I hope this is simple enough, i can explain in detail if you want, same thing will work for both sides. You can earth locally, so you only need to take two wires to the passenger door. It is possible to add a second switch in line so that you have a passenger and driver switch for the passenger window.
Add a fuse, probably 30amp for both windows (run through the same fuse). Relay is only there to stop windows being wound down with the ignition off. Personally i would have a master breaking switch to kill everything but the alarm, so then it wouldn't matter.
- docchevron132
- Bus Warrior
- Posts: 11929
- Joined: 10 Oct 2006
- Location: Sat with a hammer under 8666KGs of rust!
- Contact:
Re: How to wire a BX window motor for Race Purposes (for JayW)
JayW as in Jay from 16v??
1989 BX 17TD P2 Hybrid
1990 BX 16V It's got big hairy bollocks
1971 BL 350FG ambulance
1993 Dennis Lance 132 It's got mahooosive hairy bollocks!
Euthenasia, because enough's enough already.
1990 BX 16V It's got big hairy bollocks
1971 BL 350FG ambulance
1993 Dennis Lance 132 It's got mahooosive hairy bollocks!
Euthenasia, because enough's enough already.
-
- Site Admin
- Posts: 7512
- Joined: 10 Oct 2006
- Location: BXProjectHQ
Re: How to wire a BX window motor for Race Purposes (for JayW)
Yeah thats the one, it's looking like he's going to join us at startford, and is in no disallusion of what to expect!
Only met him the once, but i suspect he'll fit right in!
Only met him the once, but i suspect he'll fit right in!
- jayw
- Part of the decor
- Posts: 1651
- Joined: 06 Aug 2009
- Location: Planet Thargbelch Octavius IV
Re: How to wire a BX window motor for Race Purposes (for JayW)
Ay Up Lads!
I will indeed, most definitely be at Stratford! Bringing the missus too so she can moan about mans obsession with rusty old motors...
Thanks for the diagram Vanny, very simple now you've explained it and i'm glad i can use the standard switches!
Looking forward to Q2 when you've got the time, no hurry tho, i'm way premature on that one
Cheeeeeeeeeeeeeeeeeers! Jay.
I will indeed, most definitely be at Stratford! Bringing the missus too so she can moan about mans obsession with rusty old motors...
Thanks for the diagram Vanny, very simple now you've explained it and i'm glad i can use the standard switches!
Looking forward to Q2 when you've got the time, no hurry tho, i'm way premature on that one
Cheeeeeeeeeeeeeeeeeers! Jay.
Almost BX-less
-
- Site Admin
- Posts: 7512
- Joined: 10 Oct 2006
- Location: BXProjectHQ
Re: How to wire a BX window motor for Race Purposes (for JayW)
yeah q2 is going to take a little more thinking about, and at the moment i'm trying to take over the world. And go to a beer spectacular tomorrow!
- jayw
- Part of the decor
- Posts: 1651
- Joined: 06 Aug 2009
- Location: Planet Thargbelch Octavius IV
Re: How to wire a BX window motor for Race Purposes (for JayW)
No wucking furries m8, there's no rush!
Incidently, as you mentioned above I already bought a master breaker for the power, will cut everything but the alarm & stereo memory.
Gonna run the power for the windows from the original supply in the fusebox so they operate as normal just without eleventy-million feet of wire!
Enjoy the beer!!
Jay.
Incidently, as you mentioned above I already bought a master breaker for the power, will cut everything but the alarm & stereo memory.
Gonna run the power for the windows from the original supply in the fusebox so they operate as normal just without eleventy-million feet of wire!
Enjoy the beer!!
Jay.
Almost BX-less
-
- Site Admin
- Posts: 7512
- Joined: 10 Oct 2006
- Location: BXProjectHQ
Re: How to wire a BX window motor for Race Purposes (for JayW)
make sure you put the feeds to the alarm and radio on diodes, including the ignition fed for the radio. You'll probably need diodes in the circuit for central locking, indicators and horn when hooking up the alarm, otherwise you end up with the whole car wired through the alarm unit. Makes for a really fast blowing fuse the first time you operate something electrical without the master on (like press the brake lights, or a window button).
- jayw
- Part of the decor
- Posts: 1651
- Joined: 06 Aug 2009
- Location: Planet Thargbelch Octavius IV
- docchevron132
- Bus Warrior
- Posts: 11929
- Joined: 10 Oct 2006
- Location: Sat with a hammer under 8666KGs of rust!
- Contact:
Re: How to wire a BX window motor for Race Purposes (for JayW)
Ahhhh! Welcome!
Shit guys, exactley who is bringing how much beer, cos lets face it, every year we bring more than the last, and yet we still run out by mis arvo...
Shit guys, exactley who is bringing how much beer, cos lets face it, every year we bring more than the last, and yet we still run out by mis arvo...
1989 BX 17TD P2 Hybrid
1990 BX 16V It's got big hairy bollocks
1971 BL 350FG ambulance
1993 Dennis Lance 132 It's got mahooosive hairy bollocks!
Euthenasia, because enough's enough already.
1990 BX 16V It's got big hairy bollocks
1971 BL 350FG ambulance
1993 Dennis Lance 132 It's got mahooosive hairy bollocks!
Euthenasia, because enough's enough already.
- smiffy
- Centenial time waster
- Posts: 2176
- Joined: 02 Aug 2007
- Location: Ormskirk or Bristol
- Contact:
Re: How to wire a BX window motor for Race Purposes (for JayW)
Vanny, can you do a diagram how to wire up the 1 touch window for the passenger side? I have the box already in there, and the wiring loom that goes with it, but if I fit it at the moment, then I can't operate the passenger window from the drivers side......
They say an apple a day keeps the doctor away...
but now that most of them are muslim, I find bacon and sausages work better!
but now that most of them are muslim, I find bacon and sausages work better!
- docchevron132
- Bus Warrior
- Posts: 11929
- Joined: 10 Oct 2006
- Location: Sat with a hammer under 8666KGs of rust!
- Contact:
Re: How to wire a BX window motor for Race Purposes (for JayW)
oh FFS JDizzle.
It's two extra fucking wires FFS!
Jesus, even I could do that!
It's two extra fucking wires FFS!
Jesus, even I could do that!
1989 BX 17TD P2 Hybrid
1990 BX 16V It's got big hairy bollocks
1971 BL 350FG ambulance
1993 Dennis Lance 132 It's got mahooosive hairy bollocks!
Euthenasia, because enough's enough already.
1990 BX 16V It's got big hairy bollocks
1971 BL 350FG ambulance
1993 Dennis Lance 132 It's got mahooosive hairy bollocks!
Euthenasia, because enough's enough already.
- smiffy
- Centenial time waster
- Posts: 2176
- Joined: 02 Aug 2007
- Location: Ormskirk or Bristol
- Contact:
Re: How to wire a BX window motor for Race Purposes (for JayW)
That's all very well, but noone has said WHERE they go.....
They say an apple a day keeps the doctor away...
but now that most of them are muslim, I find bacon and sausages work better!
but now that most of them are muslim, I find bacon and sausages work better!
- jayw
- Part of the decor
- Posts: 1651
- Joined: 06 Aug 2009
- Location: Planet Thargbelch Octavius IV
Re: How to wire a BX window motor for Race Purposes (for JayW)
As i've just woken up and my eyes took quite some time to connect to my brain i just spent 5 minutes typing that you'd need to stuff anoter relay box in the passenger door for it to work..... then i re-read what smiffy wrote
I've taken rather a dislike now to the BX wiring, after removing about 3 miles of cable from the damn thing... green wire, brown wire, green wire, brown wire, green wire, brown wire, green wire, brown wire, OH WOW a yellow wire! Even more WOW, a blue wire!
I should be ok for beer, me and the missus work in an offy
Jay.
I've taken rather a dislike now to the BX wiring, after removing about 3 miles of cable from the damn thing... green wire, brown wire, green wire, brown wire, green wire, brown wire, green wire, brown wire, OH WOW a yellow wire! Even more WOW, a blue wire!
I should be ok for beer, me and the missus work in an offy
Jay.
Almost BX-less
-
- Site Admin
- Posts: 7512
- Joined: 10 Oct 2006
- Location: BXProjectHQ
Re: How to wire a BX window motor for Race Purposes (for JayW)
You are god!
On the wire front, you do realise that some times the yellow are +ve and some times they are -ve, and the blue wires sometimes are -ve and sometimes are +ve?
Actually, the wiring in the BX is pretty clever for Italian wiring! Once you figure it out, you can pick up any connector, look at the wires, and the connector colour and imediately work it all out!
Smiffy, its not just two extra wires, you have to move wires around in the multiplugs, if you dont then when you turn the ignition on the fuse goes ____ well it doesn't make much noise but it fails!
I'll do you a drawing when i get back from the festival.
On the wire front, you do realise that some times the yellow are +ve and some times they are -ve, and the blue wires sometimes are -ve and sometimes are +ve?
Actually, the wiring in the BX is pretty clever for Italian wiring! Once you figure it out, you can pick up any connector, look at the wires, and the connector colour and imediately work it all out!
Smiffy, its not just two extra wires, you have to move wires around in the multiplugs, if you dont then when you turn the ignition on the fuse goes ____ well it doesn't make much noise but it fails!
I'll do you a drawing when i get back from the festival.
- smiffy
- Centenial time waster
- Posts: 2176
- Joined: 02 Aug 2007
- Location: Ormskirk or Bristol
- Contact:
Re: How to wire a BX window motor for Race Purposes (for JayW)
Thanks dude, I thought there was a bit more to it than Chris was saying!!! maybe a job for stratford?
They say an apple a day keeps the doctor away...
but now that most of them are muslim, I find bacon and sausages work better!
but now that most of them are muslim, I find bacon and sausages work better!
- jayw
- Part of the decor
- Posts: 1651
- Joined: 06 Aug 2009
- Location: Planet Thargbelch Octavius IV
Re: How to wire a BX window motor for Race Purposes (for JayW)
Vanny wrote:
On the wire front, you do realise that some times the yellow are +ve and some times they are -ve, and the blue wires sometimes are -ve and sometimes are +ve?
Actually, the wiring in the BX is pretty clever for Italian wiring! Once you figure it out, you can pick up any connector, look at the wires, and the connector colour and imediately work it all out.
You're a strange one..... Since when did anyone like Italian electrics? My other main car is a Panda 100hp (and even though it was built in Poland) is testament to the old assumption that all Italians must be colourblind when it comes to wires!
In all fairness, theres not a lot of the original loom left now, aside of the engine management, all i've got left is the cabling for the dash gauges & switches (although i've removed a few unnessecary ones like front fog, rear demister & wiper), the rear light circuit and the ABS (which is on a switch so i can turn it off when required).
Jay.
Almost BX-less