- charlie
- Part of the decor
- Posts: 1426
- Joined: 27 Sep 2007
- Location: to boldly go where everyone has been before.
bastards and thingys
bsatards bit
went to have me xm injectors looked at and the first bunch of tossers said three need a recon, £25 each, and the pulsar one is knackered thats another £95
ohhh and hmm i went
soooo went of to the lucas people, and he pulled a face at the snipped wire for the pulsar one, only way i could get it off i said,
but all 4 were ok!!!!!!!!!!!!!!!!!!!!!!!!!!
its just all too easy to get ripped off by some bunch of fuckin bastards
thingy bit
anyways fitting them back on the car was trying to remember whether the two side feed thingys on the injectors have a specific in and out
or do they just connect to each other with the plastic hose thing
mind you if someone could tell me what the fuck the thingy thngs are there for would be nice
ta
went to have me xm injectors looked at and the first bunch of tossers said three need a recon, £25 each, and the pulsar one is knackered thats another £95
ohhh and hmm i went
soooo went of to the lucas people, and he pulled a face at the snipped wire for the pulsar one, only way i could get it off i said,
but all 4 were ok!!!!!!!!!!!!!!!!!!!!!!!!!!
its just all too easy to get ripped off by some bunch of fuckin bastards
thingy bit
anyways fitting them back on the car was trying to remember whether the two side feed thingys on the injectors have a specific in and out
or do they just connect to each other with the plastic hose thing
mind you if someone could tell me what the fuck the thingy thngs are there for would be nice
ta
-
- GET OUT MORE
- Posts: 8744
- Joined: 01 Nov 2007
- Location: Wigan Lancs
- Contact:
If you mean the two little spouts either side of the main feed, they are the return fuel pipes. Dependent on how fast/ slow you are going, you may or may not be using all the fuel supplied to the injector.
Looking at the engine And.....the cam belt being on your left.....the far end
thingy should have a plastic /rubber cap on it. all the other thingies are then looped together....the last one (nearest the cambelt)...connects to the tank return pipe err I think.
PS You`ll need a new set of fire washers fitting as you put the injectors back!!!!!!!
Looking at the engine And.....the cam belt being on your left.....the far end
thingy should have a plastic /rubber cap on it. all the other thingies are then looped together....the last one (nearest the cambelt)...connects to the tank return pipe err I think.
PS You`ll need a new set of fire washers fitting as you put the injectors back!!!!!!!
72... AND STILL ROCKIN..........around the world...... NOT in a chair yet
Now XBX And into HDI.....as well as other ...err.... things.
Now XBX And into HDI.....as well as other ...err.... things.
-
- Site Admin
- Posts: 7512
- Joined: 10 Oct 2006
- Location: BXProjectHQ
Theres a good chance dependant on age that the leak off/overspill outlets from the injectors infact join into a little canister in between the No2 and No3 injector. If they do, re plumb it the way phil says as those canisters can oftern leak air in with only bad starting as the give away. It is diesel right?
- charlie
- Part of the decor
- Posts: 1426
- Joined: 27 Sep 2007
- Location: to boldly go where everyone has been before.
got fire washers with the head gasket kit that i brought, so there fitted
figured out the looping pipe bit already ta
and no cannisters they just connect to one another till the last one ta again
soooooo as long as the return fuel thingys on the injectors DONT have a specified in and out then everythings kooouuuool
ta
figured out the looping pipe bit already ta
and no cannisters they just connect to one another till the last one ta again
soooooo as long as the return fuel thingys on the injectors DONT have a specified in and out then everythings kooouuuool
ta
- docchevron132
- Bus Warrior
- Posts: 11929
- Joined: 10 Oct 2006
- Location: Sat with a hammer under 8666KGs of rust!
- Contact:
-
- GET OUT MORE
- Posts: 8744
- Joined: 01 Nov 2007
- Location: Wigan Lancs
- Contact:
You`re dead right there Doc. I for one would like to see those replacement strut tops in position.
What were the like to fit Charlie?
Vanny, that was why I put err I think at the end of my post..I seem to remember that little tank thingy on an engine once....but there isn`t one on my BX. It was at least 10 years ago, so may be on a mark 1?
What were the like to fit Charlie?
Vanny, that was why I put err I think at the end of my post..I seem to remember that little tank thingy on an engine once....but there isn`t one on my BX. It was at least 10 years ago, so may be on a mark 1?
72... AND STILL ROCKIN..........around the world...... NOT in a chair yet
Now XBX And into HDI.....as well as other ...err.... things.
Now XBX And into HDI.....as well as other ...err.... things.
- docchevron132
- Bus Warrior
- Posts: 11929
- Joined: 10 Oct 2006
- Location: Sat with a hammer under 8666KGs of rust!
- Contact:
The cannister became common after about '92 I think.
As far as I know the D12 didn't have them, I've never seen one with a cannister..
Come on Charles, it's been ages since you've posted some piccies.....
As far as I know the D12 didn't have them, I've never seen one with a cannister..
Come on Charles, it's been ages since you've posted some piccies.....
1989 BX 17TD P2 Hybrid
1990 BX 16V It's got big hairy bollocks
1971 BL 350FG ambulance
1993 Dennis Lance 132 It's got mahooosive hairy bollocks!
Euthenasia, because enough's enough already.
1990 BX 16V It's got big hairy bollocks
1971 BL 350FG ambulance
1993 Dennis Lance 132 It's got mahooosive hairy bollocks!
Euthenasia, because enough's enough already.
- charlie
- Part of the decor
- Posts: 1426
- Joined: 27 Sep 2007
- Location: to boldly go where everyone has been before.
yesterday at around 12.36 a corner was turned
http://www.youtube.com/watch?v=nRT551UwPgc
fuckin fuckin fuckin kewwwlllllllllllll
http://www.youtube.com/watch?v=nRT551UwPgc
fuckin fuckin fuckin kewwwlllllllllllll
Last edited by charlie on 05 Jun 2008, edited 1 time in total.
- docchevron132
- Bus Warrior
- Posts: 11929
- Joined: 10 Oct 2006
- Location: Sat with a hammer under 8666KGs of rust!
- Contact:
-
- GET OUT MORE
- Posts: 8744
- Joined: 01 Nov 2007
- Location: Wigan Lancs
- Contact:
- charlie
- Part of the decor
- Posts: 1426
- Joined: 27 Sep 2007
- Location: to boldly go where everyone has been before.
some more bits and pieces
the strut mounts all welded up and rust proofed
only thing left is to use the rubber solution whne the car is taken off the axle stands
a few interior pics and of the old leather
and the soooooooooooooooooooooooooo cutie dog
whose knowledge of haynes is beyond all human understandin
the strut mounts all welded up and rust proofed
only thing left is to use the rubber solution whne the car is taken off the axle stands
a few interior pics and of the old leather
and the soooooooooooooooooooooooooo cutie dog
whose knowledge of haynes is beyond all human understandin
-
- GET OUT MORE
- Posts: 4639
- Joined: 12 Jun 2007
- Location: in the cowshed
-
- GET OUT MORE
- Posts: 8744
- Joined: 01 Nov 2007
- Location: Wigan Lancs
- Contact:
- charlie
- Part of the decor
- Posts: 1426
- Joined: 27 Sep 2007
- Location: to boldly go where everyone has been before.
the old bandit of course
in fact he was taking the video of me startin the xm up as well
well he did help a bit but its very off putin seein a bloke walk round in speedos, puffin on a converted butt plug pipe
but bandit always been his own man so i just let him be
errrr about those dimensions
its this big --------------------------------------------------
and about this high l
l
l
l
with some of these round the top ~~~~~~~~
this is all metric of course
:oops::oops:
in fact he was taking the video of me startin the xm up as well
well he did help a bit but its very off putin seein a bloke walk round in speedos, puffin on a converted butt plug pipe
but bandit always been his own man so i just let him be
errrr about those dimensions
its this big --------------------------------------------------
and about this high l
l
l
l
with some of these round the top ~~~~~~~~
this is all metric of course
:oops::oops:
-
- GET OUT MORE
- Posts: 8744
- Joined: 01 Nov 2007
- Location: Wigan Lancs
- Contact: