-
- Site Admin
- Posts: 7512
- Joined: 10 Oct 2006
- Location: BXProjectHQ
Re: Wings
Hmmm, i believe thems is after market, but i've been told (by some numpty) that the cheapo method is standard fit for the Mk1, possibly it was also fitted to the Ph1 for cheapness.
Bandit, all BX AC systems are simple on/off systems. They are cable controlled and so can't be temperature responsive (climate control). The slidey thing on the regular system simply determines when the pump turns on and off based on the evap temp (as best i can tell) which realistically means it does fork all.
Bandit, all BX AC systems are simple on/off systems. They are cable controlled and so can't be temperature responsive (climate control). The slidey thing on the regular system simply determines when the pump turns on and off based on the evap temp (as best i can tell) which realistically means it does fork all.
- Bx Bandit
- GET OUT MORE
- Posts: 6641
- Joined: 16 Nov 2006
- Location: Somewhere I don't want to be...
Re: Wings
The position of the slidey thing when the relay kicks in does change with temp I've noticed, to the point that when it's quite cool, you have to put the slider almost all the way along.
....There he goes, one of God's own prototypes, a high powered mutant of some kind never even considered for mass production......too weird too live.....and too rare to die
-
- GET OUT MORE
- Posts: 8744
- Joined: 01 Nov 2007
- Location: Wigan Lancs
- Contact:
Re: Wings
![Smile :)](./images/smilies/icon_smile.gif)
72... AND STILL ROCKIN..........around the world...... NOT in a chair yet
Now XBX And into HDI.....as well as other ...err.... things.
Now XBX And into HDI.....as well as other ...err.... things.
-
- Site Admin
- Posts: 7512
- Joined: 10 Oct 2006
- Location: BXProjectHQ
Re: Wings
Bandit, it simply runs the pump for longer, making the evaporator runs cooler. It is NOT temperature controlled. There is an ICE_OVER sensor which will turn off the pump when a critical temperature is reached (about 1c i suspect).
Have a look at the wiring diagram for the diesel and i think it shows the innerds of the controller.
Have a look at the wiring diagram for the diesel and i think it shows the innerds of the controller.
- Bx Bandit
- GET OUT MORE
- Posts: 6641
- Joined: 16 Nov 2006
- Location: Somewhere I don't want to be...
Re: Wings
Tis an elektricker potentiometer Phil, used to have a control over how much the a/c is actually on in relation to air temp (or evap temp as Vanny has said)
....There he goes, one of God's own prototypes, a high powered mutant of some kind never even considered for mass production......too weird too live.....and too rare to die
- Bx Bandit
- GET OUT MORE
- Posts: 6641
- Joined: 16 Nov 2006
- Location: Somewhere I don't want to be...
Re: Wings
Ah ok, will do skipper!Vanny wrote:Bandit, it simply runs the pump for longer, making the evaporator runs cooler. It is NOT temperature controlled. There is an ICE_OVER sensor which will turn off the pump when a critical temperature is reached (about 1c i suspect).
Have a look at the wiring diagram for the diesel and i think it shows the innerds of the controller.
....There he goes, one of God's own prototypes, a high powered mutant of some kind never even considered for mass production......too weird too live.....and too rare to die
- docchevron132
- Bus Warrior
- Posts: 11929
- Joined: 10 Oct 2006
- Location: Sat with a hammer under 8666KGs of rust!
- Contact:
Re: Wings
hmmm, will mine actually work at all without all this shit?
I was given to understand that valvers had idle steppers, and shit to make the AC kick out at 80% throttle / full revs... none of which this kit has..
I was given to understand that valvers had idle steppers, and shit to make the AC kick out at 80% throttle / full revs... none of which this kit has..
1989 BX 17TD P2 Hybrid
1990 BX 16V It's got big hairy bollocks
1971 BL 350FG ambulance
1993 Dennis Lance 132 It's got mahooosive hairy bollocks!
Euthenasia, because enough's enough already.
1990 BX 16V It's got big hairy bollocks
1971 BL 350FG ambulance
1993 Dennis Lance 132 It's got mahooosive hairy bollocks!
Euthenasia, because enough's enough already.
- Bx Bandit
- GET OUT MORE
- Posts: 6641
- Joined: 16 Nov 2006
- Location: Somewhere I don't want to be...
Re: Wings
Haven't the foggiest mate although, TBH, I wouldn't bother with that shit and just have it as per non-16v
....There he goes, one of God's own prototypes, a high powered mutant of some kind never even considered for mass production......too weird too live.....and too rare to die
-
- Site Admin
- Posts: 7512
- Joined: 10 Oct 2006
- Location: BXProjectHQ
Re: Wings
they do supposedly have idle jacks on valvers. Frankly i've never seen one, and while i have a wiring harness for one, i've not the foggiest what it connects to so i reverted to an alternative loom without the jack.
If i find i'm loosing too much go on max throttle then i'll consider doing something about it, but i'm not concerned, if the car can manage a weak HP pump it should be fine with a compressor on.
Doc, yours will have an automatic, no adjustable cut out with temp and pressure, it's effectively like having the slider at 75 or so percent.
If i find i'm loosing too much go on max throttle then i'll consider doing something about it, but i'm not concerned, if the car can manage a weak HP pump it should be fine with a compressor on.
Doc, yours will have an automatic, no adjustable cut out with temp and pressure, it's effectively like having the slider at 75 or so percent.
- docchevron132
- Bus Warrior
- Posts: 11929
- Joined: 10 Oct 2006
- Location: Sat with a hammer under 8666KGs of rust!
- Contact:
Re: Wings
I guess so, there is a brass turny thing on a wire that comes out of the heater box.. no idea what that does!
1989 BX 17TD P2 Hybrid
1990 BX 16V It's got big hairy bollocks
1971 BL 350FG ambulance
1993 Dennis Lance 132 It's got mahooosive hairy bollocks!
Euthenasia, because enough's enough already.
1990 BX 16V It's got big hairy bollocks
1971 BL 350FG ambulance
1993 Dennis Lance 132 It's got mahooosive hairy bollocks!
Euthenasia, because enough's enough already.
-
- Site Admin
- Posts: 7512
- Joined: 10 Oct 2006
- Location: BXProjectHQ
Re: Wings
the coil is connected to something similar to a was stat. Officially it controls the subcool rate, unofficially it makes sure exactly the right amount of gas passes through the expansion valve so that it ALL turns to gas before it reached the bottom of the evaporator.
It is amazing just how much i learned on the City and Guilds course![Very Happy :D](./images/smilies/icon_biggrin.gif)
It is amazing just how much i learned on the City and Guilds course
![Very Happy :D](./images/smilies/icon_biggrin.gif)
- docchevron132
- Bus Warrior
- Posts: 11929
- Joined: 10 Oct 2006
- Location: Sat with a hammer under 8666KGs of rust!
- Contact:
Re: Wings
well, it did, that was 10 years ago when I bought it mind...
Ahh, so having fucked about with it, I'm assuming that'll want setting up now then!
Ahh, so having fucked about with it, I'm assuming that'll want setting up now then!
1989 BX 17TD P2 Hybrid
1990 BX 16V It's got big hairy bollocks
1971 BL 350FG ambulance
1993 Dennis Lance 132 It's got mahooosive hairy bollocks!
Euthenasia, because enough's enough already.
1990 BX 16V It's got big hairy bollocks
1971 BL 350FG ambulance
1993 Dennis Lance 132 It's got mahooosive hairy bollocks!
Euthenasia, because enough's enough already.
-
- Site Admin
- Posts: 7512
- Joined: 10 Oct 2006
- Location: BXProjectHQ
Re: Wings
you cant mess with it, there is nothing adjustable, or there shouldn't be. If it is adjustable and you have actually fiddled then i suspect you've meddled with the tonnage (rather than the feedback) and fixing that could be a tad tricky. It will still work though, just maybe no so efficient as it should.
-
- GET OUT MORE
- Posts: 8744
- Joined: 01 Nov 2007
- Location: Wigan Lancs
- Contact:
Re: Wings
![Laughing :lol:](./images/smilies/icon_lol.gif)
![Sad :(](./images/smilies/icon_sad.gif)
It has a screen and you push buttons till you get the temp you want, then it's all automatic after that.
![Confused :?](./images/smilies/icon_confused.gif)
72... AND STILL ROCKIN..........around the world...... NOT in a chair yet
Now XBX And into HDI.....as well as other ...err.... things.
Now XBX And into HDI.....as well as other ...err.... things.
- Bx Bandit
- GET OUT MORE
- Posts: 6641
- Joined: 16 Nov 2006
- Location: Somewhere I don't want to be...
Re: Wings
Looking A fucking 1 mate!!!!! What's the black stuff mate?
....There he goes, one of God's own prototypes, a high powered mutant of some kind never even considered for mass production......too weird too live.....and too rare to die
- Bx Bandit
- GET OUT MORE
- Posts: 6641
- Joined: 16 Nov 2006
- Location: Somewhere I don't want to be...
Re: Wings
What you mean?Vanny wrote: should have just painted it to be honest, but you live and learn.
Hammerite isn't that good mate, really it's not. If nothing else, give it a quick rub down and slap on some of the (ironically named) Hammerite underbody stuff. Really, really good - my 16v 24 months later and aside from a bit of dirt, it still looks new and it still flexible. Hammerite is actually quite brittle despite what it says on the tin
....There he goes, one of God's own prototypes, a high powered mutant of some kind never even considered for mass production......too weird too live.....and too rare to die
- mat_the_cat
- Centenial time waster
- Posts: 2656
- Joined: 01 Apr 2009