6 min read Sometimes when installing blue lights for CSI BASICS, the window pods are far from a perfect fit. But what if the pods could be customised to every car?
6 min read Following on from the proven DIY CAN adapter, this article follows the addition of function by creating a dual CAN PCB design to use as a CAN in the middle (CITM) device.
6 min read I can’t afford to use industry-standard CAN bus hardware, but can I make my own DIY CAN Bus Adapter with simple components?
2 min read Back in the late 80’s the Peugeot TEP92 on-board diagnostic device arrived. While not too powerful it was well engineered and very useful.
4 min read To support the excellent CSI Basics charity, I help their volunteers with blue light installation to get them to incidents quickly and safely. I’ll do practically anything for Haribo!
7 min read Do I need a reversing camera? Probably not. But having retrofit one to the Freelander2 and I’m glad that I did!
5 min read It’s finally time to tackle the Fergie wiring system and see if life can be brought back into it. Will it start first time?
5 min read Long commutes in the dark, with bright lights behind, are no good for my eyes. The solution, retrofit of a Freelander dimming rearview mirror.
7 min read Using a diagnostic tool puts a big load on the car battery. To avoid damage you should use a battery support unit. But what is it, and why is it needed?
6 min read Land Rovers of a certain age eventually cry out for a diagnostic session. With dealer diagnostic sessions costing as much as £145 per hour, you…