Comments on: Citroën BX – Wiring harness, from scratch https://bxproject.co.uk/blog/citroen-bx-harness-from-scratch/ Automotive Adventures Mon, 16 Jun 2025 16:25:57 +0000 hourly 1 https://wordpress.org/?v=6.9.4 By: Admin_M https://bxproject.co.uk/blog/citroen-bx-harness-from-scratch/#comment-8236 Mon, 16 Jun 2025 16:25:57 +0000 https://bxproject.co.uk/blog/?p=150#comment-8236 In reply to Charles.

Hi Charles, generally I am using 1.5mm cross section (Between AWG 15 and 16). This is less because of current draw or derating for length, but because I find 1.5mm in modern wiring to give a better crimp. In this harness, there were a few higher current wires, which I made in 2mm cross-section (approximately AWG14). I hope that helps.

M

]]> By: Charles https://bxproject.co.uk/blog/citroen-bx-harness-from-scratch/#comment-8235 Sat, 14 Jun 2025 13:00:45 +0000 https://bxproject.co.uk/blog/?p=150#comment-8235 What gauge wire did you use for the loom? Looks so good and no doubt a good idea for a 35 year old thing..

]]>