Used Condition

Damaged and interestingly repaired

The post CitBX – Bumper – Front – Mk2 – Grey appeared first on BX Project.

Used Condition

The post CitBX – Bumper – Front – Mk1 – Light Grey appeared first on BX Project.

Used Condition

Body section only, no tailgate insert

The post CitBX – Bumper – Rear – Estate – Mk1 – Light Grey appeared first on BX Project.

Used condition

The post CitBX – Bumper – Front – Mk2 – Saloon – Plastic – Red appeared first on BX Project.

Used condition

The post CitBX – Bumper – Front – Mk1 – Saloon – Red appeared first on BX Project.

Used condition

Black skirt damaged at one end, see detailed pictures

The post CitBX – Mk1 Saloon Rear Bumper – Brown appeared first on BX Project.

Now, however, the BXProject has remanufactured the rear bumper brackets. Made from 1.5mm mild steel, laser cut, folded, and zinc passivate coated.
These replacement parts are likely to outlast the originals and probably the car, too.

Sold in pairs, these Citroen BX 16Valve rear bumper metal brackets are now available to order in the UK. However, there is limited stock!

Note that these are only for the Ph2 16Valve GFRP bumper and not the ABS bumper on the Ph1 16Valve.

The post Citroën BX 16Valve – REAR Bumper Metal Brackets (Pair) appeared first on BX Project.

Now, however, the BXProject has remanufactured the rear bumper brackets. Made from 1.5mm mild steel, laser cut, folded, and zinc passivate coated.
These replacement parts are likely to outlast the originals and probably the car, too.

Sold in pairs, these Citroen BX 16Valve rear bumper metal brackets are now available to order in the UK. However, there is limited stock!

Note that these are only for the Ph2 16Valve GFRP bumper and not the ABS bumper on the Ph1 16Valve.

The post Citroën BX 16Valve – REAR Bumper Metal Brackets (Pair) appeared first on BX Project.

After far too many years searching for a supplier, BX Project has finally secured a short run of BX 16Valve bumper trim for the grooves in the front and rear bumpers.

Made from PVC in as close material and dimension as the original parts, manufactured in Europe and retailed exclusively by the BXProject.

Sold in a continuous length of 4.3 linear meters to cover front and rear bumpers;
– 0.9 front left,
– 0.9 front right,
– 2.35 rear
– and about 15cm extra for cutting errors

Citroen BX 16Valve bumper inlay in RED is now available to order in the UK. However, there is limited stock!

Note that these are only for the Ph2 16Valve GFRP bumper and not the ABS bumper on the Ph1 16Valve.

The post Citroën BX 16Valve – Bumper Trim Inlay – Front and Rear – RED appeared first on BX Project.

After far too many years searching for a supplier, BX Project has finally secured a short run of BX 16Valve bumper trim for the grooves in the front and rear bumpers.

Made from PVC in as close material and dimension as the original parts, manufactured in Europe and retailed exclusively by the BXProject.

Sold in a continuous length of 4.3 linear meters to cover front and rear bumpers;
– 0.9 front left,
– 0.9 front right,
– 2.35 rear
– and about 15cm extra for cutting errors

Citroen BX 16Valve bumper inlay in balck is now available to order in the UK. However, there is limited stock!

Note that these are only for the Ph2 16Valve GFRP bumper and not the ABS bumper on the Ph1 16Valve.

The post Citroën BX 16Valve – Bumper Trim Inlay – Front and Rear – BLACK appeared first on BX Project.