{"id":1415,"date":"2021-02-19T14:48:38","date_gmt":"2021-02-19T14:48:38","guid":{"rendered":"https:\/\/bxproject.co.uk\/blog\/?p=1415"},"modified":"2021-03-21T11:05:10","modified_gmt":"2021-03-21T11:05:10","slug":"citroen-bx-the-mi16-engine-removal","status":"publish","type":"post","link":"https:\/\/bxproject.co.uk\/blog\/citroen-bx-the-mi16-engine-removal\/","title":{"rendered":"Citro\u00ebn BX \u2013 The Mi16 Engine Removal"},"content":{"rendered":"<\/span> 3<\/span> min. read<\/span><\/span>\n

While G553 XPO has an interesting back story<\/a>, it has been largely untouched since 2008. The Mi16 engine that came with the car has a very different story to tell. It does however need a bit of work, and to do that it will best to start with a bit of engine removal.<\/p>\n\n\n\n

Where to start on such a big restoration project?<\/h2>\n\n\n\n

Taking the engine out and rebuilding it as the first stage of restoration seems mad, even to me. But there is a little bit of logic to the madness. The engine that came with the car originated in G-SEG, a well-known car in BX circles. It was one of the few parts saving when the tin worm did for the shell it was being carried in. Previous owners have reported a number of issues with it, so it needs a damn good overhaul.<\/p>\n\n\n\n

\"G-SEG
G-SEG well loved finish on the exterior, not matched underneath<\/figcaption><\/figure>\n\n\n\n

The engine was quickly thrown into the shell of XPO to aid in shipping it to me, but it’s not connected and sat on a block of rubber on one side. Under the engine, the steering rack needs new gaiters and new fuel hoses need to go in. The wiring throughout the car is also a bit of a mess and the more access to the engine bay the better. The engine really needs to come out. Its also February and, at the time of writing, the snow is still falling. If I focus on the engine restoration first, I can work on it in the warmth of the garage!<\/p>\n\n\n\n

Removing the engine for teardown<\/h2>\n\n\n\n

Having borrowed a Clarke CFC100 engine crane<\/a> from a local chap, I could start to remove the engine from the car. Having been here before, my preference on a Citroen BX 16Valve is always to lift the engine out with the gearbox. But this huge mass has a way of hitting expensive stuff on the way out, like the radiator!<\/p>\n\n\n\n

\"G-SEGs
G-SEGs engine, sat in the engine bay of XPO<\/figcaption><\/figure>\n\n\n\n

The radiator and cowl were easily removed, with too few bolts barely holding it down. What little wiring that was still around the engine was removed. And of course, the bonnet was take off and it really gets in the way of the engine cranes jib. With only four M10 nuts to disconnect it from the car, it seems rude not to. <\/p>\n\n\n\n

\"The
The soul of the Citroen BX 16Valve removed from XPO for a teardown<\/figcaption><\/figure>\n\n\n\n

The angle of the picture above doesn’t do justice to just how much of an angle is on the engine and gearbox. I’m using a cheap load leveller on the crane, something like this one from SGS<\/a>. For around \u00a325 it’s a must-have for an engine crane, and not just for getting awkward engines out. I find it helpful for maximising out removal and working at better angles.<\/p>\n\n\n\n

Removal of the engine fluids<\/h2>\n\n\n\n

With the engine back in the modest warmth of the garage, the first task is to drain out the fluids. As the transmission already has the driveshafts out, there isn’t a lot of gear oil in the diff. But what is there is absolutely golden brown, free from debris and stinks as gear oil should. The engine oil however . . . <\/p>\n\n\n\n

\"Removal
Removal of the well used engine oil<\/figcaption><\/figure>\n\n\n\n

If I start by telling you it took a brave pill and a 3ft breaker bar to get the oil sump plug out, then the next bit shouldn’t come as a surprise. The oil is absolutely filthy! And I don’t mean in a teenage boy who’s just found out about girls sort of filthy. This oil is long past due a change and is seriously contaminated. But the old magnet under the drip tray trick suggests no metal in the oil which is always good. It’s also thicker than I would expect, perhaps the wrong grade or maybe the garage temperature isn’t helping.<\/p>\n\n\n\n

\"Oil
Oil in air intake obvious after throttle removal<\/figcaption><\/figure>\n\n\n\n

While waiting for the oils to drain out, I gave them overnight in the end, I started taking some bits off. Starting with the throttle body, I found rather a lot of oil in the intake manifold. Probably a result of many short runs and not bringing the engine up to temperature. I can’t say I’ve ever seen an engine this bad, but then I’ve not pulled that many apart.<\/p>\n\n\n\n

What to do with the engine?<\/h2>\n\n\n\n

While I had hoped for a quick clean, service and throw it back into the car, I think this engine is going to need a little bit more. In fact, the more I look at it, the more I can see years of neglect and some bodgery. Previous pilots of the engine tell me it suffers from a stuck hydraulic tappet too. So I’ll through caution to the wind, tear down the whole thing and rebuild from the bottom up.

M<\/p>\n\n\n\n

PREV – The History of G553 XPO<\/a>
NEXT –

Back to Citroen Articles<\/a>
Back to Automotive Articles<\/a><\/p>\n","protected":false},"excerpt":{"rendered":"

Perhaps not a conventional start, my first task on this restoration is the removal of the engine so I can work on it in the warm garage.<\/p>\n","protected":false},"author":1,"featured_media":1420,"comment_status":"open","ping_status":"open","sticky":false,"template":"","format":"standard","meta":{"_jetpack_newsletter_access":"","_jetpack_dont_email_post_to_subs":false,"_jetpack_newsletter_tier_id":0,"_jetpack_memberships_contains_paywalled_content":false,"_jetpack_memberships_contains_paid_content":false,"footnotes":"","jetpack_post_was_ever_published":false},"categories":[17,8,5,248],"tags":[31,10,247,243,246,61],"class_list":["post-1415","post","type-post","status-publish","format-standard","has-post-thumbnail","hentry","category-automotive-adventures","category-bx16valve","category-citroen-bx-articles","category-xpo_restoration","tag-bx-16valve","tag-citroen","tag-engine-rebuild","tag-g553-xpo","tag-mi16-engine","tag-restoration"],"yoast_head":"\nCitro\u00ebn BX \u2013 The Mi16 Engine Removal - BX Project<\/title>\n<meta name=\"description\" content=\"Perhaps not a conventional start, my first task on this restoration is the removal of the engine so I can work on it in the warm garage.\" \/>\n<meta name=\"robots\" content=\"index, follow, max-snippet:-1, max-image-preview:large, max-video-preview:-1\" \/>\n<link rel=\"canonical\" href=\"https:\/\/bxproject.co.uk\/blog\/citroen-bx-the-mi16-engine-removal\/\" \/>\n<meta property=\"og:locale\" content=\"en_GB\" \/>\n<meta property=\"og:type\" content=\"article\" \/>\n<meta property=\"og:title\" content=\"Citro\u00ebn BX \u2013 The Mi16 Engine Removal - BX Project\" \/>\n<meta property=\"og:description\" content=\"Perhaps not a conventional start, my first task on this restoration is the removal of the engine so I can work on it in the warm garage.\" \/>\n<meta property=\"og:url\" content=\"https:\/\/bxproject.co.uk\/blog\/citroen-bx-the-mi16-engine-removal\/\" \/>\n<meta property=\"og:site_name\" content=\"BX Project\" \/>\n<meta property=\"article:publisher\" content=\"https:\/\/www.facebook.com\/BXProjectFB\" \/>\n<meta property=\"article:author\" content=\"BXProjectFB\" \/>\n<meta property=\"article:published_time\" content=\"2021-02-19T14:48:38+00:00\" \/>\n<meta property=\"article:modified_time\" content=\"2021-03-21T11:05:10+00:00\" \/>\n<meta property=\"og:image\" content=\"https:\/\/bxproject.co.uk\/blog\/wp-content\/uploads\/2021\/02\/BXP5_EngOut_01_800.jpg\" \/>\n\t<meta property=\"og:image:width\" content=\"800\" \/>\n\t<meta property=\"og:image:height\" content=\"450\" \/>\n\t<meta property=\"og:image:type\" content=\"image\/jpeg\" \/>\n<meta name=\"author\" content=\"Admin_M\" \/>\n<meta name=\"twitter:card\" content=\"summary_large_image\" \/>\n<meta name=\"twitter:creator\" content=\"@bxprojectT\" \/>\n<meta name=\"twitter:site\" content=\"@BXProjectT\" \/>\n<meta name=\"twitter:label1\" content=\"Written by\" \/>\n\t<meta name=\"twitter:data1\" content=\"Admin_M\" \/>\n\t<meta name=\"twitter:label2\" content=\"Estimated reading time\" \/>\n\t<meta name=\"twitter:data2\" content=\"5 minutes\" \/>\n<script type=\"application\/ld+json\" class=\"yoast-schema-graph\">{\"@context\":\"https:\\\/\\\/schema.org\",\"@graph\":[{\"@type\":\"Article\",\"@id\":\"https:\\\/\\\/bxproject.co.uk\\\/blog\\\/citroen-bx-the-mi16-engine-removal\\\/#article\",\"isPartOf\":{\"@id\":\"https:\\\/\\\/bxproject.co.uk\\\/blog\\\/citroen-bx-the-mi16-engine-removal\\\/\"},\"author\":{\"name\":\"Admin_M\",\"@id\":\"https:\\\/\\\/bxproject.co.uk\\\/blog\\\/#\\\/schema\\\/person\\\/cdb60b055febb747294e9606dc156e1b\"},\"headline\":\"Citro\u00ebn BX \u2013 The Mi16 Engine Removal\",\"datePublished\":\"2021-02-19T14:48:38+00:00\",\"dateModified\":\"2021-03-21T11:05:10+00:00\",\"mainEntityOfPage\":{\"@id\":\"https:\\\/\\\/bxproject.co.uk\\\/blog\\\/citroen-bx-the-mi16-engine-removal\\\/\"},\"wordCount\":857,\"commentCount\":3,\"publisher\":{\"@id\":\"https:\\\/\\\/bxproject.co.uk\\\/blog\\\/#organization\"},\"image\":{\"@id\":\"https:\\\/\\\/bxproject.co.uk\\\/blog\\\/citroen-bx-the-mi16-engine-removal\\\/#primaryimage\"},\"thumbnailUrl\":\"https:\\\/\\\/bxproject.co.uk\\\/blog\\\/wp-content\\\/uploads\\\/2021\\\/02\\\/BXP5_EngOut_01_800.jpg\",\"keywords\":[\"BX 16Valve\",\"Citro\u00ebn BX\",\"Engine Rebuild\",\"G553 XPO\",\"Mi16 Engine\",\"restoration\"],\"articleSection\":[\"Automotive Adventures\",\"BX16Valve\",\"Citroen BX Articles\",\"G553 XPO Restoration\"],\"inLanguage\":\"en-GB\",\"potentialAction\":[{\"@type\":\"CommentAction\",\"name\":\"Comment\",\"target\":[\"https:\\\/\\\/bxproject.co.uk\\\/blog\\\/citroen-bx-the-mi16-engine-removal\\\/#respond\"]}]},{\"@type\":\"WebPage\",\"@id\":\"https:\\\/\\\/bxproject.co.uk\\\/blog\\\/citroen-bx-the-mi16-engine-removal\\\/\",\"url\":\"https:\\\/\\\/bxproject.co.uk\\\/blog\\\/citroen-bx-the-mi16-engine-removal\\\/\",\"name\":\"Citro\u00ebn BX \u2013 The Mi16 Engine Removal - BX Project\",\"isPartOf\":{\"@id\":\"https:\\\/\\\/bxproject.co.uk\\\/blog\\\/#website\"},\"primaryImageOfPage\":{\"@id\":\"https:\\\/\\\/bxproject.co.uk\\\/blog\\\/citroen-bx-the-mi16-engine-removal\\\/#primaryimage\"},\"image\":{\"@id\":\"https:\\\/\\\/bxproject.co.uk\\\/blog\\\/citroen-bx-the-mi16-engine-removal\\\/#primaryimage\"},\"thumbnailUrl\":\"https:\\\/\\\/bxproject.co.uk\\\/blog\\\/wp-content\\\/uploads\\\/2021\\\/02\\\/BXP5_EngOut_01_800.jpg\",\"datePublished\":\"2021-02-19T14:48:38+00:00\",\"dateModified\":\"2021-03-21T11:05:10+00:00\",\"description\":\"Perhaps not a conventional start, my first task on this restoration is the removal of the engine so I can work on it in the warm garage.\",\"breadcrumb\":{\"@id\":\"https:\\\/\\\/bxproject.co.uk\\\/blog\\\/citroen-bx-the-mi16-engine-removal\\\/#breadcrumb\"},\"inLanguage\":\"en-GB\",\"potentialAction\":[{\"@type\":\"ReadAction\",\"target\":[\"https:\\\/\\\/bxproject.co.uk\\\/blog\\\/citroen-bx-the-mi16-engine-removal\\\/\"]}]},{\"@type\":\"ImageObject\",\"inLanguage\":\"en-GB\",\"@id\":\"https:\\\/\\\/bxproject.co.uk\\\/blog\\\/citroen-bx-the-mi16-engine-removal\\\/#primaryimage\",\"url\":\"https:\\\/\\\/bxproject.co.uk\\\/blog\\\/wp-content\\\/uploads\\\/2021\\\/02\\\/BXP5_EngOut_01_800.jpg\",\"contentUrl\":\"https:\\\/\\\/bxproject.co.uk\\\/blog\\\/wp-content\\\/uploads\\\/2021\\\/02\\\/BXP5_EngOut_01_800.jpg\",\"width\":800,\"height\":450,\"caption\":\"Mi16 engine removal\"},{\"@type\":\"BreadcrumbList\",\"@id\":\"https:\\\/\\\/bxproject.co.uk\\\/blog\\\/citroen-bx-the-mi16-engine-removal\\\/#breadcrumb\",\"itemListElement\":[{\"@type\":\"ListItem\",\"position\":1,\"name\":\"Home\",\"item\":\"https:\\\/\\\/bxproject.co.uk\\\/blog\\\/\"},{\"@type\":\"ListItem\",\"position\":2,\"name\":\"Citro\u00ebn BX \u2013 The Mi16 Engine Removal\"}]},{\"@type\":\"WebSite\",\"@id\":\"https:\\\/\\\/bxproject.co.uk\\\/blog\\\/#website\",\"url\":\"https:\\\/\\\/bxproject.co.uk\\\/blog\\\/\",\"name\":\"BX Project\",\"description\":\"Automotive Adventures\",\"publisher\":{\"@id\":\"https:\\\/\\\/bxproject.co.uk\\\/blog\\\/#organization\"},\"potentialAction\":[{\"@type\":\"SearchAction\",\"target\":{\"@type\":\"EntryPoint\",\"urlTemplate\":\"https:\\\/\\\/bxproject.co.uk\\\/blog\\\/?s={search_term_string}\"},\"query-input\":{\"@type\":\"PropertyValueSpecification\",\"valueRequired\":true,\"valueName\":\"search_term_string\"}}],\"inLanguage\":\"en-GB\"},{\"@type\":\"Organization\",\"@id\":\"https:\\\/\\\/bxproject.co.uk\\\/blog\\\/#organization\",\"name\":\"BXProject\",\"url\":\"https:\\\/\\\/bxproject.co.uk\\\/blog\\\/\",\"logo\":{\"@type\":\"ImageObject\",\"inLanguage\":\"en-GB\",\"@id\":\"https:\\\/\\\/bxproject.co.uk\\\/blog\\\/#\\\/schema\\\/logo\\\/image\\\/\",\"url\":\"https:\\\/\\\/bxproject.co.uk\\\/blog\\\/wp-content\\\/uploads\\\/2021\\\/07\\\/BXP_RJW_banner-300-dpi-800.jpg\",\"contentUrl\":\"https:\\\/\\\/bxproject.co.uk\\\/blog\\\/wp-content\\\/uploads\\\/2021\\\/07\\\/BXP_RJW_banner-300-dpi-800.jpg\",\"width\":800,\"height\":267,\"caption\":\"BXProject\"},\"image\":{\"@id\":\"https:\\\/\\\/bxproject.co.uk\\\/blog\\\/#\\\/schema\\\/logo\\\/image\\\/\"},\"sameAs\":[\"https:\\\/\\\/www.facebook.com\\\/BXProjectFB\",\"https:\\\/\\\/x.com\\\/BXProjectT\",\"https:\\\/\\\/www.instagram.com\\\/bxproject_ig\\\/?hl=en\",\"https:\\\/\\\/www.youtube.com\\\/channel\\\/UCO7rHKgcIafXLItQRGj-BXQ\"]},{\"@type\":\"Person\",\"@id\":\"https:\\\/\\\/bxproject.co.uk\\\/blog\\\/#\\\/schema\\\/person\\\/cdb60b055febb747294e9606dc156e1b\",\"name\":\"Admin_M\",\"image\":{\"@type\":\"ImageObject\",\"inLanguage\":\"en-GB\",\"@id\":\"https:\\\/\\\/secure.gravatar.com\\\/avatar\\\/d1993dfbb08228583c93eda998592304d6d62589c3c1aaf39555713522778745?s=96&d=mm&r=g\",\"url\":\"https:\\\/\\\/secure.gravatar.com\\\/avatar\\\/d1993dfbb08228583c93eda998592304d6d62589c3c1aaf39555713522778745?s=96&d=mm&r=g\",\"contentUrl\":\"https:\\\/\\\/secure.gravatar.com\\\/avatar\\\/d1993dfbb08228583c93eda998592304d6d62589c3c1aaf39555713522778745?s=96&d=mm&r=g\",\"caption\":\"Admin_M\"},\"sameAs\":[\"http:\\\/\\\/bxproject.co.uk\\\/blog\",\"BXProjectFB\",\"https:\\\/\\\/www.instagram.com\\\/bxproject_ig\",\"https:\\\/\\\/x.com\\\/bxprojectT\"]}]}<\/script>\n<!-- \/ Yoast SEO plugin. -->","yoast_head_json":{"title":"Citro\u00ebn BX \u2013 The Mi16 Engine Removal - BX Project","description":"Perhaps not a conventional start, my first task on this restoration is the removal of the engine so I can work on it in the warm garage.","robots":{"index":"index","follow":"follow","max-snippet":"max-snippet:-1","max-image-preview":"max-image-preview:large","max-video-preview":"max-video-preview:-1"},"canonical":"https:\/\/bxproject.co.uk\/blog\/citroen-bx-the-mi16-engine-removal\/","og_locale":"en_GB","og_type":"article","og_title":"Citro\u00ebn BX \u2013 The Mi16 Engine Removal - BX Project","og_description":"Perhaps not a conventional start, my first task on this restoration is the removal of the engine so I can work on it in the warm garage.","og_url":"https:\/\/bxproject.co.uk\/blog\/citroen-bx-the-mi16-engine-removal\/","og_site_name":"BX Project","article_publisher":"https:\/\/www.facebook.com\/BXProjectFB","article_author":"BXProjectFB","article_published_time":"2021-02-19T14:48:38+00:00","article_modified_time":"2021-03-21T11:05:10+00:00","og_image":[{"width":800,"height":450,"url":"https:\/\/bxproject.co.uk\/blog\/wp-content\/uploads\/2021\/02\/BXP5_EngOut_01_800.jpg","type":"image\/jpeg"}],"author":"Admin_M","twitter_card":"summary_large_image","twitter_creator":"@bxprojectT","twitter_site":"@BXProjectT","twitter_misc":{"Written by":"Admin_M","Estimated reading time":"5 minutes"},"schema":{"@context":"https:\/\/schema.org","@graph":[{"@type":"Article","@id":"https:\/\/bxproject.co.uk\/blog\/citroen-bx-the-mi16-engine-removal\/#article","isPartOf":{"@id":"https:\/\/bxproject.co.uk\/blog\/citroen-bx-the-mi16-engine-removal\/"},"author":{"name":"Admin_M","@id":"https:\/\/bxproject.co.uk\/blog\/#\/schema\/person\/cdb60b055febb747294e9606dc156e1b"},"headline":"Citro\u00ebn BX \u2013 The Mi16 Engine Removal","datePublished":"2021-02-19T14:48:38+00:00","dateModified":"2021-03-21T11:05:10+00:00","mainEntityOfPage":{"@id":"https:\/\/bxproject.co.uk\/blog\/citroen-bx-the-mi16-engine-removal\/"},"wordCount":857,"commentCount":3,"publisher":{"@id":"https:\/\/bxproject.co.uk\/blog\/#organization"},"image":{"@id":"https:\/\/bxproject.co.uk\/blog\/citroen-bx-the-mi16-engine-removal\/#primaryimage"},"thumbnailUrl":"https:\/\/bxproject.co.uk\/blog\/wp-content\/uploads\/2021\/02\/BXP5_EngOut_01_800.jpg","keywords":["BX 16Valve","Citro\u00ebn BX","Engine Rebuild","G553 XPO","Mi16 Engine","restoration"],"articleSection":["Automotive Adventures","BX16Valve","Citroen BX Articles","G553 XPO Restoration"],"inLanguage":"en-GB","potentialAction":[{"@type":"CommentAction","name":"Comment","target":["https:\/\/bxproject.co.uk\/blog\/citroen-bx-the-mi16-engine-removal\/#respond"]}]},{"@type":"WebPage","@id":"https:\/\/bxproject.co.uk\/blog\/citroen-bx-the-mi16-engine-removal\/","url":"https:\/\/bxproject.co.uk\/blog\/citroen-bx-the-mi16-engine-removal\/","name":"Citro\u00ebn BX \u2013 The Mi16 Engine Removal - BX Project","isPartOf":{"@id":"https:\/\/bxproject.co.uk\/blog\/#website"},"primaryImageOfPage":{"@id":"https:\/\/bxproject.co.uk\/blog\/citroen-bx-the-mi16-engine-removal\/#primaryimage"},"image":{"@id":"https:\/\/bxproject.co.uk\/blog\/citroen-bx-the-mi16-engine-removal\/#primaryimage"},"thumbnailUrl":"https:\/\/bxproject.co.uk\/blog\/wp-content\/uploads\/2021\/02\/BXP5_EngOut_01_800.jpg","datePublished":"2021-02-19T14:48:38+00:00","dateModified":"2021-03-21T11:05:10+00:00","description":"Perhaps not a conventional start, my first task on this restoration is the removal of the engine so I can work on it in the warm garage.","breadcrumb":{"@id":"https:\/\/bxproject.co.uk\/blog\/citroen-bx-the-mi16-engine-removal\/#breadcrumb"},"inLanguage":"en-GB","potentialAction":[{"@type":"ReadAction","target":["https:\/\/bxproject.co.uk\/blog\/citroen-bx-the-mi16-engine-removal\/"]}]},{"@type":"ImageObject","inLanguage":"en-GB","@id":"https:\/\/bxproject.co.uk\/blog\/citroen-bx-the-mi16-engine-removal\/#primaryimage","url":"https:\/\/bxproject.co.uk\/blog\/wp-content\/uploads\/2021\/02\/BXP5_EngOut_01_800.jpg","contentUrl":"https:\/\/bxproject.co.uk\/blog\/wp-content\/uploads\/2021\/02\/BXP5_EngOut_01_800.jpg","width":800,"height":450,"caption":"Mi16 engine removal"},{"@type":"BreadcrumbList","@id":"https:\/\/bxproject.co.uk\/blog\/citroen-bx-the-mi16-engine-removal\/#breadcrumb","itemListElement":[{"@type":"ListItem","position":1,"name":"Home","item":"https:\/\/bxproject.co.uk\/blog\/"},{"@type":"ListItem","position":2,"name":"Citro\u00ebn BX \u2013 The Mi16 Engine Removal"}]},{"@type":"WebSite","@id":"https:\/\/bxproject.co.uk\/blog\/#website","url":"https:\/\/bxproject.co.uk\/blog\/","name":"BX Project","description":"Automotive Adventures","publisher":{"@id":"https:\/\/bxproject.co.uk\/blog\/#organization"},"potentialAction":[{"@type":"SearchAction","target":{"@type":"EntryPoint","urlTemplate":"https:\/\/bxproject.co.uk\/blog\/?s={search_term_string}"},"query-input":{"@type":"PropertyValueSpecification","valueRequired":true,"valueName":"search_term_string"}}],"inLanguage":"en-GB"},{"@type":"Organization","@id":"https:\/\/bxproject.co.uk\/blog\/#organization","name":"BXProject","url":"https:\/\/bxproject.co.uk\/blog\/","logo":{"@type":"ImageObject","inLanguage":"en-GB","@id":"https:\/\/bxproject.co.uk\/blog\/#\/schema\/logo\/image\/","url":"https:\/\/bxproject.co.uk\/blog\/wp-content\/uploads\/2021\/07\/BXP_RJW_banner-300-dpi-800.jpg","contentUrl":"https:\/\/bxproject.co.uk\/blog\/wp-content\/uploads\/2021\/07\/BXP_RJW_banner-300-dpi-800.jpg","width":800,"height":267,"caption":"BXProject"},"image":{"@id":"https:\/\/bxproject.co.uk\/blog\/#\/schema\/logo\/image\/"},"sameAs":["https:\/\/www.facebook.com\/BXProjectFB","https:\/\/x.com\/BXProjectT","https:\/\/www.instagram.com\/bxproject_ig\/?hl=en","https:\/\/www.youtube.com\/channel\/UCO7rHKgcIafXLItQRGj-BXQ"]},{"@type":"Person","@id":"https:\/\/bxproject.co.uk\/blog\/#\/schema\/person\/cdb60b055febb747294e9606dc156e1b","name":"Admin_M","image":{"@type":"ImageObject","inLanguage":"en-GB","@id":"https:\/\/secure.gravatar.com\/avatar\/d1993dfbb08228583c93eda998592304d6d62589c3c1aaf39555713522778745?s=96&d=mm&r=g","url":"https:\/\/secure.gravatar.com\/avatar\/d1993dfbb08228583c93eda998592304d6d62589c3c1aaf39555713522778745?s=96&d=mm&r=g","contentUrl":"https:\/\/secure.gravatar.com\/avatar\/d1993dfbb08228583c93eda998592304d6d62589c3c1aaf39555713522778745?s=96&d=mm&r=g","caption":"Admin_M"},"sameAs":["http:\/\/bxproject.co.uk\/blog","BXProjectFB","https:\/\/www.instagram.com\/bxproject_ig","https:\/\/x.com\/bxprojectT"]}]}},"jetpack_featured_media_url":"https:\/\/bxproject.co.uk\/blog\/wp-content\/uploads\/2021\/02\/BXP5_EngOut_01_800.jpg","jetpack_sharing_enabled":true,"jetpack_likes_enabled":true,"jetpack-related-posts":[{"id":1397,"url":"https:\/\/bxproject.co.uk\/blog\/citroen-bx-xpo-history\/","url_meta":{"origin":1415,"position":0},"title":"Citro\u00ebn BX – The History of G553 XPO","author":"Admin_M","date":"14 February 2021","format":false,"excerpt":"Having recently bought a new Citro\u00ebn BX 16Valve project, I've had a look back over its 31year history. XPO certainly has a story to tell.","rel":"","context":"In "Automotive Adventures"","block_context":{"text":"Automotive Adventures","link":"https:\/\/bxproject.co.uk\/blog\/category\/automotive-adventures\/"},"img":{"alt_text":"XPO and BAH at Southways Automotive","src":"https:\/\/i0.wp.com\/bxproject.co.uk\/blog\/wp-content\/uploads\/2021\/02\/BXP5_16_800.jpg?resize=350%2C200&ssl=1","width":350,"height":200,"srcset":"https:\/\/i0.wp.com\/bxproject.co.uk\/blog\/wp-content\/uploads\/2021\/02\/BXP5_16_800.jpg?resize=350%2C200&ssl=1 1x, https:\/\/i0.wp.com\/bxproject.co.uk\/blog\/wp-content\/uploads\/2021\/02\/BXP5_16_800.jpg?resize=525%2C300&ssl=1 1.5x, https:\/\/i0.wp.com\/bxproject.co.uk\/blog\/wp-content\/uploads\/2021\/02\/BXP5_16_800.jpg?resize=700%2C400&ssl=1 2x"},"classes":[]},{"id":1753,"url":"https:\/\/bxproject.co.uk\/blog\/xpo_engine_history\/","url_meta":{"origin":1415,"position":1},"title":"Citro\u00ebn BX – Mi16 Engine History","author":"Admin_M","date":"30 April 2021","format":false,"excerpt":"The XPO project came with a donor engine and a folder of history. Lets have a look through the engine history and see what we can learn.","rel":"","context":"In "Automotive Adventures"","block_context":{"text":"Automotive Adventures","link":"https:\/\/bxproject.co.uk\/blog\/category\/automotive-adventures\/"},"img":{"alt_text":"G-Seg engine history","src":"https:\/\/i0.wp.com\/bxproject.co.uk\/blog\/wp-content\/uploads\/2021\/04\/GSeg_History.jpg?resize=350%2C200&ssl=1","width":350,"height":200,"srcset":"https:\/\/i0.wp.com\/bxproject.co.uk\/blog\/wp-content\/uploads\/2021\/04\/GSeg_History.jpg?resize=350%2C200&ssl=1 1x, https:\/\/i0.wp.com\/bxproject.co.uk\/blog\/wp-content\/uploads\/2021\/04\/GSeg_History.jpg?resize=525%2C300&ssl=1 1.5x, https:\/\/i0.wp.com\/bxproject.co.uk\/blog\/wp-content\/uploads\/2021\/04\/GSeg_History.jpg?resize=700%2C400&ssl=1 2x, https:\/\/i0.wp.com\/bxproject.co.uk\/blog\/wp-content\/uploads\/2021\/04\/GSeg_History.jpg?resize=1050%2C600&ssl=1 3x, https:\/\/i0.wp.com\/bxproject.co.uk\/blog\/wp-content\/uploads\/2021\/04\/GSeg_History.jpg?resize=1400%2C800&ssl=1 4x"},"classes":[]},{"id":1369,"url":"https:\/\/bxproject.co.uk\/blog\/citroen-bx-xpo-restoration-project\/","url_meta":{"origin":1415,"position":2},"title":"Citro\u00ebn BX – A New Restoration Project","author":"Admin_M","date":"7 February 2021","format":false,"excerpt":"Ready for the next Automotive Adventure, an opportunity came about I couldn't resist. Now I have a new Citro\u00ebn BX 16Valve restoration project","rel":"","context":"In "Automotive Adventures"","block_context":{"text":"Automotive Adventures","link":"https:\/\/bxproject.co.uk\/blog\/category\/automotive-adventures\/"},"img":{"alt_text":"Citroen BX 16Valve restoration","src":"https:\/\/i0.wp.com\/bxproject.co.uk\/blog\/wp-content\/uploads\/2021\/02\/BXP5_09_800.jpg?resize=350%2C200&ssl=1","width":350,"height":200,"srcset":"https:\/\/i0.wp.com\/bxproject.co.uk\/blog\/wp-content\/uploads\/2021\/02\/BXP5_09_800.jpg?resize=350%2C200&ssl=1 1x, https:\/\/i0.wp.com\/bxproject.co.uk\/blog\/wp-content\/uploads\/2021\/02\/BXP5_09_800.jpg?resize=525%2C300&ssl=1 1.5x, https:\/\/i0.wp.com\/bxproject.co.uk\/blog\/wp-content\/uploads\/2021\/02\/BXP5_09_800.jpg?resize=700%2C400&ssl=1 2x"},"classes":[]},{"id":1433,"url":"https:\/\/bxproject.co.uk\/blog\/citroen-bx-cleaning-the-engine-and-gearbox\/","url_meta":{"origin":1415,"position":3},"title":"Citro\u00ebn BX \u2013 Cleaning the Engine and Gearbox","author":"Admin_M","date":"26 February 2021","format":false,"excerpt":"I don't think I've ever ever seen such filth under the hood of a car. Its time for cleaning the engine, before tearing it down.","rel":"","context":"In "Automotive Adventures"","block_context":{"text":"Automotive Adventures","link":"https:\/\/bxproject.co.uk\/blog\/category\/automotive-adventures\/"},"img":{"alt_text":"cleaned MI16 engine","src":"https:\/\/i0.wp.com\/bxproject.co.uk\/blog\/wp-content\/uploads\/2021\/02\/BXP5_EngClean_07_800.jpg?resize=350%2C200&ssl=1","width":350,"height":200,"srcset":"https:\/\/i0.wp.com\/bxproject.co.uk\/blog\/wp-content\/uploads\/2021\/02\/BXP5_EngClean_07_800.jpg?resize=350%2C200&ssl=1 1x, https:\/\/i0.wp.com\/bxproject.co.uk\/blog\/wp-content\/uploads\/2021\/02\/BXP5_EngClean_07_800.jpg?resize=525%2C300&ssl=1 1.5x, https:\/\/i0.wp.com\/bxproject.co.uk\/blog\/wp-content\/uploads\/2021\/02\/BXP5_EngClean_07_800.jpg?resize=700%2C400&ssl=1 2x"},"classes":[]},{"id":1815,"url":"https:\/\/bxproject.co.uk\/blog\/citroen-bx-xpo-dw10-crank-for-d6c-mi16\/","url_meta":{"origin":1415,"position":4},"title":"Citro\u00ebn BX – XPO – A Crank For The D6C Engine","author":"Admin_M","date":"9 May 2021","format":false,"excerpt":"In March I found a crank journal measuring undersize, creating quite a quandary. I'll try to share my learning, ups, and downs, with you.","rel":"","context":"In "Automotive Adventures"","block_context":{"text":"Automotive Adventures","link":"https:\/\/bxproject.co.uk\/blog\/category\/automotive-adventures\/"},"img":{"alt_text":"CrankDissection","src":"https:\/\/i0.wp.com\/bxproject.co.uk\/blog\/wp-content\/uploads\/2021\/05\/BXP_XPOCrank_12_800.png?resize=350%2C200&ssl=1","width":350,"height":200,"srcset":"https:\/\/i0.wp.com\/bxproject.co.uk\/blog\/wp-content\/uploads\/2021\/05\/BXP_XPOCrank_12_800.png?resize=350%2C200&ssl=1 1x, https:\/\/i0.wp.com\/bxproject.co.uk\/blog\/wp-content\/uploads\/2021\/05\/BXP_XPOCrank_12_800.png?resize=525%2C300&ssl=1 1.5x, https:\/\/i0.wp.com\/bxproject.co.uk\/blog\/wp-content\/uploads\/2021\/05\/BXP_XPOCrank_12_800.png?resize=700%2C400&ssl=1 2x"},"classes":[]},{"id":1486,"url":"https:\/\/bxproject.co.uk\/blog\/citroen-bx-mi16-engine-strip\/","url_meta":{"origin":1415,"position":5},"title":"Citro\u00ebn BX – MI16 Engine Strip","author":"Admin_M","date":"7 March 2021","format":false,"excerpt":"While cleaning the engine I started to strip the ancillaries and found a multitude of poor engineering practices, and 10mm sockets!","rel":"","context":"In "Automotive Adventures"","block_context":{"text":"Automotive Adventures","link":"https:\/\/bxproject.co.uk\/blog\/category\/automotive-adventures\/"},"img":{"alt_text":"10mm bonus socket","src":"https:\/\/i0.wp.com\/bxproject.co.uk\/blog\/wp-content\/uploads\/2021\/03\/BXP_EngStrip_07_800.jpg?resize=350%2C200&ssl=1","width":350,"height":200,"srcset":"https:\/\/i0.wp.com\/bxproject.co.uk\/blog\/wp-content\/uploads\/2021\/03\/BXP_EngStrip_07_800.jpg?resize=350%2C200&ssl=1 1x, https:\/\/i0.wp.com\/bxproject.co.uk\/blog\/wp-content\/uploads\/2021\/03\/BXP_EngStrip_07_800.jpg?resize=525%2C300&ssl=1 1.5x, https:\/\/i0.wp.com\/bxproject.co.uk\/blog\/wp-content\/uploads\/2021\/03\/BXP_EngStrip_07_800.jpg?resize=700%2C400&ssl=1 2x"},"classes":[]}],"_links":{"self":[{"href":"https:\/\/bxproject.co.uk\/blog\/wp-json\/wp\/v2\/posts\/1415","targetHints":{"allow":["GET"]}}],"collection":[{"href":"https:\/\/bxproject.co.uk\/blog\/wp-json\/wp\/v2\/posts"}],"about":[{"href":"https:\/\/bxproject.co.uk\/blog\/wp-json\/wp\/v2\/types\/post"}],"author":[{"embeddable":true,"href":"https:\/\/bxproject.co.uk\/blog\/wp-json\/wp\/v2\/users\/1"}],"replies":[{"embeddable":true,"href":"https:\/\/bxproject.co.uk\/blog\/wp-json\/wp\/v2\/comments?post=1415"}],"version-history":[{"count":0,"href":"https:\/\/bxproject.co.uk\/blog\/wp-json\/wp\/v2\/posts\/1415\/revisions"}],"wp:featuredmedia":[{"embeddable":true,"href":"https:\/\/bxproject.co.uk\/blog\/wp-json\/wp\/v2\/media\/1420"}],"wp:attachment":[{"href":"https:\/\/bxproject.co.uk\/blog\/wp-json\/wp\/v2\/media?parent=1415"}],"wp:term":[{"taxonomy":"category","embeddable":true,"href":"https:\/\/bxproject.co.uk\/blog\/wp-json\/wp\/v2\/categories?post=1415"},{"taxonomy":"post_tag","embeddable":true,"href":"https:\/\/bxproject.co.uk\/blog\/wp-json\/wp\/v2\/tags?post=1415"}],"curies":[{"name":"wp","href":"https:\/\/api.w.org\/{rel}","templated":true}]}}