-
- GET OUT MORE
- Posts: 8744
- Joined: 01 Nov 2007
- Location: Wigan Lancs
- Contact:
Re: Went into Halfords today
What are spark plugs????..........Oh wait...., do they still use those things on smelly petrol cars
72... AND STILL ROCKIN..........around the world...... NOT in a chair yet
Now XBX And into HDI.....as well as other ...err.... things.
Now XBX And into HDI.....as well as other ...err.... things.
- docchevron132
- Bus Warrior
- Posts: 11929
- Joined: 10 Oct 2006
- Location: Sat with a hammer under 8666KGs of rust!
- Contact:
Re: Went into Halfords today
They do in mine! But triple electrode plugs are an alien concept for Halfrauds..
Really must fix the diesel though, however much the valver is, over £100 a week on fuel is getting a bit scary.
Have shiny built up ready to go head for the TD, so I might wham the cunting thing on this weekend and return to oil burning cheapness. Until it breaks again.. All over one poxy little bastard pipe...
Really must fix the diesel though, however much the valver is, over £100 a week on fuel is getting a bit scary.
Have shiny built up ready to go head for the TD, so I might wham the cunting thing on this weekend and return to oil burning cheapness. Until it breaks again.. All over one poxy little bastard pipe...
1989 BX 17TD P2 Hybrid
1990 BX 16V It's got big hairy bollocks
1971 BL 350FG ambulance
1993 Dennis Lance 132 It's got mahooosive hairy bollocks!
Euthenasia, because enough's enough already.
1990 BX 16V It's got big hairy bollocks
1971 BL 350FG ambulance
1993 Dennis Lance 132 It's got mahooosive hairy bollocks!
Euthenasia, because enough's enough already.
-
- GET OUT MORE
- Posts: 8744
- Joined: 01 Nov 2007
- Location: Wigan Lancs
- Contact:
Re: Went into Halfords today
19 n/a's are FTW
72... AND STILL ROCKIN..........around the world...... NOT in a chair yet
Now XBX And into HDI.....as well as other ...err.... things.
Now XBX And into HDI.....as well as other ...err.... things.
- docchevron132
- Bus Warrior
- Posts: 11929
- Joined: 10 Oct 2006
- Location: Sat with a hammer under 8666KGs of rust!
- Contact:
Re: Went into Halfords today
You are not wrong!
I did literally hundreds of thousands of miles trouble free bar a couple of HG's in the old N/A, this bloody turbo lump has been nothing but grief since the moment I fitted the fucking thing..
Still, the new head has standard valves, but still with N/A cam, so it'll be a tad slower than the current head, but, if I can stop the hoses from failing it might actually be a bit more reliable....
I did literally hundreds of thousands of miles trouble free bar a couple of HG's in the old N/A, this bloody turbo lump has been nothing but grief since the moment I fitted the fucking thing..
Still, the new head has standard valves, but still with N/A cam, so it'll be a tad slower than the current head, but, if I can stop the hoses from failing it might actually be a bit more reliable....
1989 BX 17TD P2 Hybrid
1990 BX 16V It's got big hairy bollocks
1971 BL 350FG ambulance
1993 Dennis Lance 132 It's got mahooosive hairy bollocks!
Euthenasia, because enough's enough already.
1990 BX 16V It's got big hairy bollocks
1971 BL 350FG ambulance
1993 Dennis Lance 132 It's got mahooosive hairy bollocks!
Euthenasia, because enough's enough already.
-
- Site Admin
- Posts: 7512
- Joined: 10 Oct 2006
- Location: BXProjectHQ
- jonathan_dyane
- New Member
- Posts: 379
- Joined: 07 Apr 2008
- Location: Liverpool
Re: Went into Halfords today
Aye, the economy will be handy; they don't have garages in Darlo yet...
Jonathan.
Working vehicle: 1986 Mercedes 190D 2.5
Broken: GS 1220 Estate, Tomos Noped several MZ's, David Brown 30D.
Working vehicle: 1986 Mercedes 190D 2.5
Broken: GS 1220 Estate, Tomos Noped several MZ's, David Brown 30D.
- Bx Bandit
- GET OUT MORE
- Posts: 6641
- Joined: 16 Nov 2006
- Location: Somewhere I don't want to be...
Re: Went into Halfords today
On that note Doc, from your experience, am I likely to significantly bugger my 1.7TD if I strap on the Garrett off the 2.1 without fiddling the wastegate?
....There he goes, one of God's own prototypes, a high powered mutant of some kind never even considered for mass production......too weird too live.....and too rare to die
-
- GET OUT MORE
- Posts: 8744
- Joined: 01 Nov 2007
- Location: Wigan Lancs
- Contact:
Re: Went into Halfords today
Well that was part of the reason I suggested a refreshment break at my house.
It would be roughly 1/2 way for you and we could do the last bit in mine to save on fuel costs for everyone!!
Discuss!
It would be roughly 1/2 way for you and we could do the last bit in mine to save on fuel costs for everyone!!
Discuss!
72... AND STILL ROCKIN..........around the world...... NOT in a chair yet
Now XBX And into HDI.....as well as other ...err.... things.
Now XBX And into HDI.....as well as other ...err.... things.
- docchevron132
- Bus Warrior
- Posts: 11929
- Joined: 10 Oct 2006
- Location: Sat with a hammer under 8666KGs of rust!
- Contact:
Re: Went into Halfords today
Suspect the darlo trip may be a non starter anyway, doolalli never posted so meh..
No bandit, should be fine with the turbo as is mate.
The only reason mine died this time is a split water hose that fucked all the water out on the M5.
Had little choice but to continue 20 miles to work by which time the head was banana shaped.
Sadly it's the branch hose you can't get anymore, so I'll be making one up from various plumbing shit this week, along with fitting another head, which wasn't all that cheap after fitting new valves and all the usual shit like a skim etc.
To cap it all off the fricking N/S axial joint has decided to fail on the valver, so I've yet again got two shagged cars. Good job I've got the 205 in stock at the mo!
Happily, axial joints are a stocked item and I'll have a shiny new one in my sweaty palm tomorrow. Even more happily the N/S joint is rather easier to do than the O/S!
So that'll be one of the many front end rattles sorted, although it really needs a rack, but they aint cheap, and I'm spending much more than I earn right now, so it'll have to keep for another day in the summer when I can be fucked to swear a lot again.
No bandit, should be fine with the turbo as is mate.
The only reason mine died this time is a split water hose that fucked all the water out on the M5.
Had little choice but to continue 20 miles to work by which time the head was banana shaped.
Sadly it's the branch hose you can't get anymore, so I'll be making one up from various plumbing shit this week, along with fitting another head, which wasn't all that cheap after fitting new valves and all the usual shit like a skim etc.
To cap it all off the fricking N/S axial joint has decided to fail on the valver, so I've yet again got two shagged cars. Good job I've got the 205 in stock at the mo!
Happily, axial joints are a stocked item and I'll have a shiny new one in my sweaty palm tomorrow. Even more happily the N/S joint is rather easier to do than the O/S!
So that'll be one of the many front end rattles sorted, although it really needs a rack, but they aint cheap, and I'm spending much more than I earn right now, so it'll have to keep for another day in the summer when I can be fucked to swear a lot again.
1989 BX 17TD P2 Hybrid
1990 BX 16V It's got big hairy bollocks
1971 BL 350FG ambulance
1993 Dennis Lance 132 It's got mahooosive hairy bollocks!
Euthenasia, because enough's enough already.
1990 BX 16V It's got big hairy bollocks
1971 BL 350FG ambulance
1993 Dennis Lance 132 It's got mahooosive hairy bollocks!
Euthenasia, because enough's enough already.
- Bx Bandit
- GET OUT MORE
- Posts: 6641
- Joined: 16 Nov 2006
- Location: Somewhere I don't want to be...
Re: Went into Halfords today
Thanks for that Doc, just after a bit more lower down like.
Anyway, which pipe is it mate? May have one, used but otherwise good!
Anyway, which pipe is it mate? May have one, used but otherwise good!
....There he goes, one of God's own prototypes, a high powered mutant of some kind never even considered for mass production......too weird too live.....and too rare to die
-
- GET OUT MORE
- Posts: 8744
- Joined: 01 Nov 2007
- Location: Wigan Lancs
- Contact:
Re: Went into Halfords today
Hozetech??? or at least an equivalent you have down there, can they not make you one up??
72... AND STILL ROCKIN..........around the world...... NOT in a chair yet
Now XBX And into HDI.....as well as other ...err.... things.
Now XBX And into HDI.....as well as other ...err.... things.
- docchevron132
- Bus Warrior
- Posts: 11929
- Joined: 10 Oct 2006
- Location: Sat with a hammer under 8666KGs of rust!
- Contact:
Re: Went into Halfords today
Planning to cobble something together..
It's the branch pipe off the bottom of the header tank, one pipe goes to the stat housing, t'other pipe goes to the rad IIRC..
Cant chop anymore out of it (it's a bend at the end where it fits on the stat housing), and frankly the whole fuckng thing is rotten as a rotten thing on rotten day.
Time expired shite.
As is the small octopus (NLA).
Even worse, the N/S axial joint on the valver is beyond fucked. Got it on the ramp today, the play in it was, erm, worrying.. and guess what.. NLA.
Happily 2cv's had one on the shelf they've had for years, but the O/S joint has some play in it, so fuck knows where I'll get another one..
When I think of all the racks I've given away over theyears I could cry. But I'm a man, so I wont.
It's the branch pipe off the bottom of the header tank, one pipe goes to the stat housing, t'other pipe goes to the rad IIRC..
Cant chop anymore out of it (it's a bend at the end where it fits on the stat housing), and frankly the whole fuckng thing is rotten as a rotten thing on rotten day.
Time expired shite.
As is the small octopus (NLA).
Even worse, the N/S axial joint on the valver is beyond fucked. Got it on the ramp today, the play in it was, erm, worrying.. and guess what.. NLA.
Happily 2cv's had one on the shelf they've had for years, but the O/S joint has some play in it, so fuck knows where I'll get another one..
When I think of all the racks I've given away over theyears I could cry. But I'm a man, so I wont.
1989 BX 17TD P2 Hybrid
1990 BX 16V It's got big hairy bollocks
1971 BL 350FG ambulance
1993 Dennis Lance 132 It's got mahooosive hairy bollocks!
Euthenasia, because enough's enough already.
1990 BX 16V It's got big hairy bollocks
1971 BL 350FG ambulance
1993 Dennis Lance 132 It's got mahooosive hairy bollocks!
Euthenasia, because enough's enough already.
-
- GET OUT MORE
- Posts: 8744
- Joined: 01 Nov 2007
- Location: Wigan Lancs
- Contact:
Re: Went into Halfords today
yes sounds like some stainless / copper tube / elbows and pieces of straight rubber to me, complete with good ol jubilees
What does the axial joint look like Doc??
What does the axial joint look like Doc??
72... AND STILL ROCKIN..........around the world...... NOT in a chair yet
Now XBX And into HDI.....as well as other ...err.... things.
Now XBX And into HDI.....as well as other ...err.... things.
-
- Site Admin
- Posts: 7512
- Joined: 10 Oct 2006
- Location: BXProjectHQ
Re: Went into Halfords today
what steering racks? Pretty sure i have two spare if you want one. both in liverpool, where i am now, so send me a text if i am to collect one!
- Stinkwheel(Matt)
- Established
- Posts: 838
- Joined: 09 Jan 2007
- Location: Northants
Re: Went into Halfords today
Now thats a worry. What the FUCK are you supposed to do about that then, they are sorta important really.As is the small octopus (NLA).
Cars, who'd bloody have 'em
OK, so i've got some stuff, some of it goes, some of it doesnt, some of it never will again!
- Father Ted
- Centenial time waster
- Posts: 2780
- Joined: 03 Apr 2009
- Location: Granadaland
Re: Went into Halfords today
Fabricating something to do the job using a combination of 15mm and 10mm copper pipe, some jubilee clips and pubber hose wouldnt be impossible, but it would need moving as (obviously) the copper pipe isnt as flexible as the rubber.
A length in 15mm from the pressure regulator, then off this you need four or five( I ant remember off the top of my head) 10mm pipes for the tank, front and rear HC's and the steering, not sure if there ist another feed for something. It could be done. It might not look pretty, but it could be done.
A length in 15mm from the pressure regulator, then off this you need four or five( I ant remember off the top of my head) 10mm pipes for the tank, front and rear HC's and the steering, not sure if there ist another feed for something. It could be done. It might not look pretty, but it could be done.
- Bx Bandit
- GET OUT MORE
- Posts: 6641
- Joined: 16 Nov 2006
- Location: Somewhere I don't want to be...
Re: Went into Halfords today
I think the axial joints are the same as pug 306s (and other pugs too 405?) and are also shared with quite a few other makes. I only know as I was farting about this very week on t'internet and found this out.
A useful thing BTW is on AEP once you have selected a part, they have a drop down showing what other vehicles the part fits.
I know I have said pipe Doc, tis the one that runs long and thin across the top of the rad to the o/s????? If you want it's yours and I think in good fettle.
On the octopus side, PR Net shows both are available but (are you sitting down?) £52.77 for littl'un and £84.86 for big'un
With this in mind, I've been considering changing the LHM tank and octopii to the Xantia style. Having had a quick look, they seem to of done it in simpler sections of pipe that can be joined, rather than one expensive spaghetti junction of octopus!
Just had another look on pr net, if it's the water pipe I'm thinking of Doc it is still available from Cit but for £77 odd!
A useful thing BTW is on AEP once you have selected a part, they have a drop down showing what other vehicles the part fits.
I know I have said pipe Doc, tis the one that runs long and thin across the top of the rad to the o/s????? If you want it's yours and I think in good fettle.
On the octopus side, PR Net shows both are available but (are you sitting down?) £52.77 for littl'un and £84.86 for big'un
With this in mind, I've been considering changing the LHM tank and octopii to the Xantia style. Having had a quick look, they seem to of done it in simpler sections of pipe that can be joined, rather than one expensive spaghetti junction of octopus!
Just had another look on pr net, if it's the water pipe I'm thinking of Doc it is still available from Cit but for £77 odd!
....There he goes, one of God's own prototypes, a high powered mutant of some kind never even considered for mass production......too weird too live.....and too rare to die
-
- GET OUT MORE
- Posts: 8744
- Joined: 01 Nov 2007
- Location: Wigan Lancs
- Contact:
Re: Went into Halfords today
Good work Bandit, our very own ferret!!!
If ever I re pipe the drybollox I will move everything important to where you can get at it, then just pipe up to it.
Haven't seen a xant set up but would think that I could manufacture Octopii from aluminium billets???
If ever I re pipe the drybollox I will move everything important to where you can get at it, then just pipe up to it.
Haven't seen a xant set up but would think that I could manufacture Octopii from aluminium billets???
72... AND STILL ROCKIN..........around the world...... NOT in a chair yet
Now XBX And into HDI.....as well as other ...err.... things.
Now XBX And into HDI.....as well as other ...err.... things.
- Bx Bandit
- GET OUT MORE
- Posts: 6641
- Joined: 16 Nov 2006
- Location: Somewhere I don't want to be...
Re: Went into Halfords today
Well, as I have just this very afternoon found out, the pipes from the LHM reservoir are rubber for about a foot, then push fit over metal pipework. I'd think there's enough room to fit a similar set-up but to make the set-up compatible with, and replaceable by the Xantia 'short octopus' then you'd have to use the Xantia Reservoir which may have it's own issues, shape being one of them, position possibly being another.
....There he goes, one of God's own prototypes, a high powered mutant of some kind never even considered for mass production......too weird too live.....and too rare to die
-
- GET OUT MORE
- Posts: 8744
- Joined: 01 Nov 2007
- Location: Wigan Lancs
- Contact:
Re: Went into Halfords today
Unless I'm misunderstanding you Bandit, that's what I mean by moving things and piping up.
Obviously that's the return bit so by using some rubber pipe and some ordinary car copper brake pipe (it's a good fit on Cit rubber) you can use existing reservoir.
Obviously that's the return bit so by using some rubber pipe and some ordinary car copper brake pipe (it's a good fit on Cit rubber) you can use existing reservoir.
72... AND STILL ROCKIN..........around the world...... NOT in a chair yet
Now XBX And into HDI.....as well as other ...err.... things.
Now XBX And into HDI.....as well as other ...err.... things.