Mega Shed – Shed of the Year Edition
The Mega Shed has been submitted for the Shed of the Year '23 competition, so it seemed a perfect time for a summary write up.
Ford 7610 – Free Flow Return
Using the spool valves and joystick to control the loader was becoming a faff. What I need is a free flow return.
Citroën BX – Heater Tap Overhaul – Part 4
Part four of the heater tap overhaul article series focuses on dismantling the valve block and appropriate restoration steps.
Ford 7610 – Fitting a loader
With the tractor now serviced, it could be pressed into service. To move materials around, I set about fitting a loader.
Citroën BX – XPO – Unpainting the A-pillar – Eps26
In the previous article, the repairs on XPO were finally completed and repainted. However, I soon find I'm unpainting the A-pillar!
Ford 7610 – Minor Service Turns Major
After the first wobbly drive, the 7610 is sent of for a minor service that turns major. Several thousand pounds later and it drives lovely!
Citroën BX – XPO – Painting the A-pillar – Eps25
With the welding finally finished, attention turns to painting the A-pillar. This several-month stage doesn't end well!
Citroën BX – XPO – Wheel Arch Repair – Eps24
Just when I thought I was done with welding, I realised I had best tackle the wheel arch repair before committing to paint.
Citroën BX – XPO – Welding in the repair panel – Eps23
While the big cut hadn't gone quite as I hoped, welding in the repair panel goes a little better. Quickly the car comes back together.
Citroën BX – XPO – The Big Cut – Eps22
I simply couldn't put it off any longer. Time to put on my big boy pants and fire up the grinder. The day had come for the Big Cut. And after all the build up, it could have gone better!
Ford 7610 – First Drive
With the wiring complete, tax and insurance in place, it was finally time for me to take the Ford 7610 on its first drive. What could possibly go wrong?
Citroën BX – XPO – Old A-Pillar Removal – Eps21
Oh my, oh my! Yet another six months have passed since the last XPO update back in June. This is only the second update in twelve months. Frankly,…
The BXProject Year – 2022
A chaotic BXProject Year 2022 has impacted the time to share stories and adventures. Let's review 2022 and consider what might be in 2023.
3D Printing – Improving the Ender 5 lighting
Following the introduction of the DIY enclosure, I need to improve the Ender5 lighting so I can see how the print is progressing.